استپر موتور 3 آمپر 57BYGH56 به همراه درایور موتور TB6600

استپر موتور 3 آمپر 57BYGH56 به همراه درایور موتور TB6600

کاربرد استپر موتور YH57BYGH56 و درایور موتورTB6600:

1. پرینتر سه بعدی
   

مشخصات استپر موتور 3 آمپر YH57BYGH56 و همراه درایور موتورTB6600:

مشخصات موتور:

1. دقت زاویه پله: ±5% بدون بار
2. دقت Resistance: ±10%
3. دقت القا: ±20%
4. کلاس Insulation: B
5. مقاومت دی الکتریک: 500V AC برای یک دقیقه
6. خلاصی شفت رادیال: حداکثر 0.06 (450 گرم بار)
7. خلاصی شفت محوری: حداکثر 80.0 (450 گرم بار)
8. قطر شفت: 6.35 میلی متر
9. طول شفت: 20 میلی متر

مشخصات درایور:

1. مدل: TB6600
2. سیگنال پالس: 3.3V / 5V / 24V 
3. ولتاژ ورودی: 9 ~ 42V دی سی
4. جریان: 3 آمپر به همراه مدار تطبیقی سرعت و بهینه ساز خودکار جریان
5. محافظت: جریان و ولتاژ بیش از حد، اتصال کوتاه، ولتاژ کم و محافظ ENA آفلاین

مستندات:
راه اندازی YH57BYGH56-401A6

Description:
Stepper motors are an important part of 3D printers. They are used in a variety of applications depending on the type of printer. For example, stepper motors are used to move the extruder or the build platform along the x,y, and z-axis. The extruder assembly also has a stepper motor used to pull the filament into the extruder.
The TB6600 Stepper Motor Driver is a user-friendly, professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers with 5V digital pulse signal output. The TB6600 stepper motor driver has a wide range of power input 9~42VDC. It can produce 4A output peak current, which is enough for the most stepper motors. This stepper driver supports speed and direction control. It provides 8 kinds of current control from 0.5A to 3.5A and 7 kinds of micro-steps.

Stepper motors are unique in that they can move to a known interval and then hold that position. Because they are a good motor to move an object to a repeatable position, they are often used in robotics and in printers. Stepper motors come in a variety of sizes. The most popular sizes used in 3D printers are NEMA 14, NEMA 17 and NEMA 23 and NEMA 24. NEMA is a measurement standardized by the National Electrical Manufacturers Association (NEMA) and refers to the frame size of the motor. Just because a motor has a larger frame doesn’t mean it has more torque.
When it comes to powering a CNC machine, the heart and soul of the machine relies on the motor. The CNC router's speed, accuracy, and precision all rely on the size and type of the motor. The two primary motor classes that are used with CNC machines are stepper motors and servo motors.

Application:
3D printer

Features:
Motor model: 57BYGH56
 Step Angle Accuracy: ±5%(full step, no load)
 Resistance Accuracy: ±10%
 Inductance Accuracy: ±20%
 Temperature Rise: 80℃CMax.(rated current,2 phase on)
 Ambient Temperature: 10℃+50℃
 Insulation Class: B
 Dielectric Strength: 500V AC for one minute
 Shaft Radial Play: 0.06Max.(450g load)
 Shaft Axial Play: 0.08Max.(450g load)
shaft diameter: 6.35mm
shaft length: 20mm

Drive parameters:
Drive Model: TB6600 upgrade
Pulse signal: 3.3V / 5V / 24V compatible. . No channeling resistance
Input voltage: DC (DC) 9 ~ 42V to adapt to harsh grid environment
Current: 4A original speed adaptive circuit, automatic current optimization
Subdivision: 6400 subdivision
A variety of protection: over-current, over voltage, under voltage, short circuit protection, Offline (ENA) protection