ماژول ESP32-F دارای بلوتوث وایفای داخلی

Description:
The ESP-32F is a universal Wi-Fi-BT-BLE MCU module that is powerful and versatile and can be used in low-power sensor networks and for extremely demanding tasks such as speech coding, audio streaming and MP3 decoding.
The core of this module is the ESP32 chip, which is scalable and adaptive. The two CPU cores can be individually controlled or powered up. The clock frequency can be adjusted from 80 MHz to 240 MHz . The user can power off the CPU and use a low-power coprocessor to constantly monitor the state change of the peripheral or whether certain analogs exceed the threshold. The ESP32 also integrates a wide range of peripherals including capacitive touch sensors, Hall sensors, low noise sense amplifiers, SD card interfaces, Ethernet interfaces, high speed SDIO , SPI , UART , I2S and I2C .

Application:
IOT
Remote control devices

Features:
CPU:
Xtensa® 32-bit LX6 single/dual-core processor with up to 600 DMIPS
448 KB ROM
520 KB SRAM
the RTC in the 16 KB SRAM
QSPI can connect up . 4 th Flash / the SRAM , each Flash up to 16 MB
supply voltage: 2.2 to 3.6
working current: average: 80 mA
Package size: 18 mm x 25.5 mm x 2.8 mm
Temperature range: -40 ° C ~ +85 ° C *
Clock and timer
Built-in 8 MHz oscillator with self-calibration
built-in RC oscillator, support self-calibration
supports external 2 MHz to 40 MHz crystal oscillator
support external 32 kHz crystal for RTC , support self-calibration
2 timers groups, each group including 2 th 64-bit general-purpose timers and . 1 main system watchdog
RTC timer with sub-second precision
RTC watchdog
Peripheral interface
12-bit SAR ADC with up to 18 channels
2 th 8-bit D / A converter
10 touch sensors
temperature sensor
4 th SPI
2 Ge I2S
2 Ge I2C
3 Ge UART
1 Ge Host SD / eMMC / SDIO
1 th the Slave the SDIO / the SPI
Ethernet MAC interface with dedicated DMA , support IEEE 1588
CAN 2.0
IR ( TX / RX )
motor PWM
LED PWM with up to 16 channels
Hall sensor
ultra low noise preamplifier
Wi-Fi

standard:
FCC/CE/IC/TELEC/KCC/SRRC/NCC
protocol:
802.11 b/g/n/d/e/i/k/r ( 802.11n , speed up to 150 Mbps )
A-PDU and A-MSDU aggregation, support 0.4 μs guard interval

Frequency Range:
2.4 ~ 2.5 GHz
Wi-Fi mode:
Station/softAP/SoftAP+station/P2P
Security Mechanism:
WPA/WPA2/WPA2-Enterprise/WPS

Encryption type:
AES/RSA/ECC/SHA
Bluetooth

protocol:
Compliant with Bluetooth v4.2 BR/EDR and BLE standards

RF:
NZIF receiver with -98 dBm sensitivity
Class-1, Class-2 and Class-3 transmitters
AFH

Audio:
CVSD and SBC audio