ماژول درایور موتور DC با قابلیت کنترل چرخش معکوس

Description:
The motor forward and reverse controller is used to control the running status of the motor to ensure that the motor can be precisely controlled. Applicable to occasions where motor control requirements are increased. 

Function:
KI is the forward rotation start button
K2 is the reverse rotation start button
SWI is the forward rotation limit switch
SW2 is the reverse limit switch
1. Press KI and the motor will start to rotate immediately until the SWI is closed.
2. Press K2 and the motor immediately starts to reverse until SW2 closes and stops.
3. When K2 is pressed during forward rotation, it will immediately switch to reverse; when reversed, pressing KI will immediately switch to forward rotation.

Application:
Toy
Intelligent robot control
smart car
Curtain
Mechanical control

Features:
Operating Voltage : 4.0-40V DC
Module power consumption: 0.6W (Without load )
Signal input : Active low, the input is the negative of the optocoupler. If the voltage is lower than 2V, it is considered to have a signal.
Responding speed :KI K2 is 20mS and SWI SW2 is 50mS
Output current : 20A
PCB size : 83mm x 46mm x 20mm