هوالرزاق


دسته بندی
ماژول چیپ فرستنده دو طرفه CJMCU-75176 چیپ SN75176A
ماژول چیپ فرستنده دو طرفه CJMCU-75176 چیپ SN75176A ماژول چیپ فرستنده دو طرفه CJMCU-75176 چیپ SN75176A ماژول چیپ فرستنده دو طرفه CJMCU-75176 چیپ SN75176A

ماژول چیپ فرستنده دو طرفه CJMCU-75176 چیپ SN75176A

تولید کننده: CJMCU
کد انبار : 7568-123-11897
مدل کالا : CJMCU-75176
جستارش : A1-11-0705C
موجودی: 5
قیمت:
211,070 تومان

تعداد: - +
   - یا -   

ماژول bi-direction باس دیفرانسل SN75176A محصول CJMCU

ماژول CJMCU-75176 یک ماژول فرستنده دو طرفه برای باس یا درگاه تفاضلی مبتنی بر آی سی SN75176A است و برای تبادل داده Bi-directional در سیستم های چند نقطه ای در خطوط انتقال داده استفاده می شود و برای ارسال داده به ولتاژ 5 ولتی جهت تغذیه نیاز دارد. این چیپ فرستنده در دو سطح بالا و پایین عمل می کند و برای خطوط انتقال داده متعادل کاربرد دارد و با استانداردهای جهانی ANSI Standard EIA/TIA-422-B و ITU Recommendation V.11 سازگاری دارد.

جریان راه اندازی این ماژول 60 میلی آمپریست و در مقابل حرارت و اتصال معکوس ورودی ها حفاظت شده و در زمانی که دمای اتصال به 150 درجه سانتی گراد برسد مدار حفاظ عمل می کند.


کاربرد ماژول چیپ فرستنده دو طرفه CJMCU-75176:

  1. ارتباطات سریال RS485 سرعت پایین ( 5 مگابیت بر ثانیه و یا کمتر)

مشخصات ماژول چیپ فرستنده دو طرفه CJMCU-75176:

  1. محدوده ولتاژ تغذیه: 4.75 ~ 5.25 V
  2. ولتاژ هر ورودی باس: –7 ~ 12 V
  3. ولتاژ ورودی سطح بالا: min 2 V
  4. ولتاژ ورودی سطح پایین:  max 0.8 V
  5. ولتاژ تفاضلی: ±12 V
  6. جریان خروجی سطح بالا: درایور –60 mA, گیرنده –400 میکرو آمپر
  7. جریان خروجی سطح پایین: درایور –60 mA, گیرنده –8 میلی آمپر
  8. محدوده دمای عملیاتی: 0 تا 70 درجه سانتی گراد

مستندات:
دیتاشیت آی سی sn75176a


Description:

The SN75176A differential bus transceiver is a monolithic integrated circuit designed for bidirectional data communication on multipoint bus-transmission lines. It is designed for balanced transmission lines and meets ANSI Standard EIA/TIA-422-B and ITU Recommendation V.11.
The SN75176A combines a 3-state differential line driver and a differential input line receiver, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, that can be externally connected together to function as a direction control.
The driver differential outputs and the receiver differential inputs are connected internally to form differential input/output (I/O) bus ports that are designed to offer minimum loading to the bus whenever the driver is disabled or VCC = 0. These ports feature wide positive and negative common mode voltage ranges making the device suitable for party-line applications.
The driver is designed to handle loads up to 60 mA of sink or source current. The driver features positive and negative-current limiting and thermal shutdown for protection from line fault conditions. Thermal shutdown is designed to occur at a junction temperature of approximately 150°C. The receiver features a minimum input impedance of 12 kΩ, an input sensitivity of ±200 mV, and a typical input hysteresis of 50 mV.

The SN75176A can be used in transmission-line applications employing the SN75172 and SN75174 quadruple differential line drivers and SN75173 and SN75175 quadruple differential line receivers.

The SN75176A is characterized for operation from 0°C to 70°C.


Application:
Low Speed RS485 communication (5 Mbps or less)
For 10 Mbps, use SN75176B


Features:
VCC, Supply Voltage: 4.75 ~ 5.25 V
VI or VIC, Voltage at any buss terminal: (separately or common mode) –7 ~ 12 V
VIH, High-level input voltage: min 2 V
VIL, Low-level input voltage: max 0.8 V
VID, Differential input voltage: ±12 V
IOH, High-level output current: Driver –60 mA, Receiver –400 µA
IOL, Low-level output current: Driver 60mA, Receiver 8
Operating free-air temperature 0 ~ 70 °C


از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-7568.html
AftabRayaneh©2022