ترموستات دیجیتال دما XK-W2001 با پریز هوشمند 220V

The XK W2001 temperature controller module is used to delay the operation of the device after a power failure and return it to protect the load such as a refrigerator or freezer from damage, and it works with a voltage of 220V and a current of 6A (1500W). It controls temperatures between -50°C and 110°C and also has the ability to control heating or cooling.

P0 to set the starting temperature:

Press the set button to enter the internal menu, the default display is P0. Press the set button again to set the desired starting temperature by pressing the up and down buttons.

P1 to set the stop temperature:

Press the Set button to enter the internal menu, the digital display is P0, press the up and down buttons to go to P1, press the Set button again, and press the up and down buttons to set the desired stop temperature do

P2 for temperature correction:

In the same way, enter the internal menu, go to P2 using the up and down buttons, press the set button again and set the desired calibration temperature using the up and down buttons. In the settings, if the detected temperature value is 0.5°C higher than the actual temperature value, the desired calibration temperature is set to -0.5°C. If the detection temperature value is 1°C lower than the actual temperature value, the set calibration temperature is 1°C. Detection temperature ± calibration temperature = actual temperature.

Setting P3 started delay:

In the same way, enter the internal menu, go to P3 through the up and down keys, press the setting key again and set the desired delay time (in minutes) through the up and down keys. Delayed start is usually used to cool the compressor, if it is used for refrigerator, this value should be adjusted, depending on the size of the compressor back pressure, the general setting value is 3-6 minutes, if you are not used to control the compressor or to Don't need delay function, ignore this directly

How to set the heating mode:

Setting key: start temperature < stop temperature (the program automatically determines the working mode as heating mode)

How to set the cooling mode:

Setting key: start temperature > stop temperature (the program will automatically set the working mode as cooling mode)

When setting the heating mode, if the set temperature value is accidentally reversed, the output indicator will not light up and the load will not work, if the above situation occurs after setting, you can check whether the set temperature value is reversed or no

Home freezer

refrigerator

Industrial chiller

steamer

Greenhouses

Aquariums

Coal heaters

Aquacultures

Incubators

Output power: 1500 watts

Input power: 110-220 volts

Output type: direct output

Output capacity: maximum 10 amps

Temperature control accuracy: 0.1 degrees Celsius

Temperature control range: -50 to 110 degrees Celsius

Temperature measurement range: -50 to 110 degrees Celsius

Accuracy of temperature measurement: 0.2 degrees Celsius

Measurement input: waterproof probe NTC10K L=1 meter