هوالرزاق


دسته بندی
ماژول آمپلی فایر 3 وات مدل PAM8403
ماژول آمپلی فایر 3 وات مدل PAM8403 ماژول آمپلی فایر 3 وات مدل PAM8403 ماژول آمپلی فایر 3 وات مدل PAM8403 ماژول آمپلی فایر 3 وات مدل PAM8403 ماژول آمپلی فایر 3 وات مدل PAM8403

ماژول آمپلی فایر 3 وات مدل PAM8403

کد انبار : 779-95-1852
مدل کالا : PAM8403-FV
جستارش : A2-05-0702A
موجودی: 53
قیمت:
29,910 تومان

تعداد: - +
   - یا -   

ماژول آمپلی فایر 3 وات مدل PAM8403-FV همراه با ولوم متغیر

ماژول آمپلی فایر PAM8403 با توان خروجی 3 وات مجزا و خروجی استریو یک برد دیجیتال کوچک است که با ولتاژ 5 ولت تغذیه می شود و برای راه اندازی اسپیکرهای 4 اهم و 8 اهم گزینه مناسبی است و می تواند حتی زمانی که هیچ وسیله ای به ورودی صدا آن وصل نیست بطور عالی نویز را حذف کند.
مجهز بودن به فیلتر یگانه Null-LC از کلاس D بر روی برد و همچنین امکان اتصال مستقیم ماژول به USB کامپیوتر جهت تغدیه از امکانات این ماژول است. تقویت کنندگی فوق العاده قوی و طراحی مینیاتوری که باعث می شود که از آن بتوان بطور اینترنال در پروژه ها و محصولات مختلف دیجیتالی استفاده کرد.
از این ماژول می توانید به همراه برد آردوینو در پروژه های خود استفاده کنید.

کاربرد ماژول تقویت کننده استریو 3 وات PAM8403 :

  1. مانیتور LCD / پروژکتور 
  2. نوت بوک
  3. بلندگوهای قابل حمل
  4. دستگاه پخش دی وی دی قابل حمل
  5. و...

مشخصات ماژول تقویت کننده استریو 3 وات PAM8403 :

  1. ولتاژ تغذیه: 5.5 ~ 2.5 ولت
  2. خروجی: 2 تا 3وات
  3. دارای نویز خروجی بسیار کم
  4. حفاظت در برابر اتصال کوتاه
  5. ابعاد: 15 * 20.2 29.5 میلی متر
  6. دارای پتانسیومتر جهت تغییر ولوم صدا

مستندات:
دیتا شیت PAM8403-FV


Description :
The PAM8403 is a 3W, class-D audio amplifier. It offers low THD+N, allowing it to achieve high-quality sound reproduction. The new filterless architecture allows the device to drive the speaker directly, requiring no low-pass output filters, thus saving the PCB area.
With the same numbers of external components, the efficiency of the PAM8403 is much better than that of class-AB cousins and can achieve high amplification efficiency of 85%.
This module can directly drive 4 Ω/8 Ω small speakers.
The PAM8403 is available in the SOP-16 package.

Applications:
 LCD Monitors / TV Projectors
 Notebook Computers
 Portable Speakers
 Portable DVD Players, Game Machines
 Cellular Phones/Speaker Phones

Application Note:
1. When the PAM8403 works with LC filters, it should be connected with the speaker before it's powered on, otherwise, it will be damaged easily.
2. When the PAM8403 works without LC filters, it's better to add a ferrite chip bead at the outgoing line of the speaker for suppressing the possible electromagnetic interference.
3. The recommended operating voltage is 5.5V. When the PAM8403 is powered with four battery cells, it should be noted that the voltage of four new dry or alkaline batteries is over 6.0V, higher than its operation voltage, which will probably damage the device. Therefore, it's recommended to use either four Ni-MH (Nickel Metal Hydride) rechargeable batteries or 3 dry or alkaline batteries.
4. One should not make the input signal too large. The large signal can cause the clipping of the output signal when increasing the volume. This will damage the device because of the big gain of the PAM8403.
5. When testing the PAM8403 without LC filters by using a resistor instead of a speaker as the output load, the test results, e.g. THD or efficiency, will be worse than those of using the speaker as load.

Features :
Product Name: PAM8403 Digital Amplifier Board
Supply Range: 2.5 ~ 5.5 V
Low Output: 3W * 2
Superior Low Noise
Short Circuit Protection
Thermal Shutdown
Pb-Free Package
Few External Components to Save the Space and Cost
Dimensions: 29.5 * 20.2 * 15mm (excluding protruding potentiometer lever)

از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-779.html
AftabRayaneh©2022