هوالرزاق


دسته بندی
ماژول تقویت کننده ترموکوپل MAX31855
ماژول تقویت کننده ترموکوپل MAX31855 ماژول تقویت کننده ترموکوپل MAX31855 ماژول تقویت کننده ترموکوپل MAX31855 ماژول تقویت کننده ترموکوپل MAX31855

ماژول تقویت کننده ترموکوپل MAX31855

کد انبار : 1080-78-2265
مدل کالا : MAX31855 module
جستارش : A1-10-0501B
موجودی: 1
قیمت:
328,520 تومان

تعداد: - +
   - یا -   

ماژول تقویت کننده ترموکوپل MAX31855

ترموکوپل ها مدارات حساسی هستند و برای جبران سرما، نیاز به تقویت کننده یا ماژول آمپلی فایر ترموکوپل max31855 دارند و به راحتی با میکروکنترلر ارتباط می گیرد و پروتکل ارتباطی آن SPI است. 
آی سی MAX31855 قابلیت خوانش دما از -270 درجه سانتی گراد تا 1350 درجه سانتی گراد را با گام 0.2 درجه سانتی گراد دارد و قادر به اندازه گیری محدوده وسیعی از دما است.


کاربرد ماژول تقویت کننده ترموکوپل مدل MAX31855 :

  1. لوازم خانگی
  2. صنایع
  3. سیستم های سرمایشی و گرمایشی

مشخصات ماژول تقویت کننده ترموکوپل مدل MAX31855 :

  1. قابلیت کار با ترموکوپل تایپ k
  2. دمای خروجی: -270°C تا +1350°C
  3. تغذیه: 3.3 تا 5v
  4. پروتکل دیتای خروجی SPI
  5. ورودی و خروجی 3 پین
  6. ابعاد: 20 در 20 در 3.28 میلی متر

مستندات:
دیتاشیت آی سی MAX31855


Description:

Thermocouples are very sensitive, and therefore need to use cold compensation requires a good amplifier. All the MAX31855K ​​for you, you can easily with any microcontroller, or even a no analog input IO port. The interface board MAX31855K ​​chip, a 3.3V regulator with bypass capacitors with 10uF and level shifting circuit, equipped with a 2-pin terminal block (for connecting to the thermocouple)

MAX31855K ​​now used instead of the previous MAX6675 chip, so it is possible to measure a wide temperature measuring range. Now includes ferrite beads and filter capacitors onboard for better stability.

The MAX31855 performs cold-junction compensation and digitizes the signal from a K-, J-, N-, T-, S-, R-, or E-type thermocouple. The data is output in a signed 14-bit, SPI-compatible, read-only format. This converter resolves temperatures to 0.25°C, allows readings as high as +1800°C and as low as -270°C, and exhibits thermocouple accuracy of ±2°C for temperatures ranging from -200°C to +700°C for K-type thermocouples. 


Application:
Industrial
applicance
HVAC


Features:
Works with any K type thermocouple
Will not work with any other kind of thermocouple other than K type
-270°C to +1350°C output in 0.25 degree increments
Internal temperature reading
3.3 to 5v power supply and logic level compliant!
SPI data output requires any 3 digital I/O pins.
Length: 20mm/0.8in
Width: 20mm/0.8in
Height: 3.28mm/0.12in
Weight: 1.33g/0.05oz

از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-1080.html
AftabRayaneh©2022