هوالرزاق


دسته بندی
ماژول مبدل USB به سریال RS485 چیپ PL2303
ماژول مبدل USB به سریال RS485 چیپ PL2303 ماژول مبدل USB به سریال RS485 چیپ PL2303 ماژول مبدل USB به سریال RS485 چیپ PL2303 ماژول مبدل USB به سریال RS485 چیپ PL2303

ماژول مبدل USB به سریال RS485 چیپ PL2303

کد انبار : 915-114-2049
مدل کالا : RJ-RS485USB
جستارش : B1-01-0908A
موجودی: در حال حاضر موجود نمی باشد. موجودی کالا
قیمت:
130,840 تومان

تعداد: - +
   - یا -   
برچسب ها: مبدل usb, Rs485, چیپ pl2303

ماژول مبدل USB به سریال RS485 دارای چیپ PL2303

RS485 از جمله مهمترین پروتکل های ارتباط سریالی در صنعت و ارتباط از راه دور می باشد. این پروتکل به دستگاه ها اجازه می دهد تا چندین دستگاه به یکدیگر متصل شود و بتوان آن ها را از مسافت 1200 متری اداره کرد. RS485 مدل به روز شده و توسعه یافته RS232 می باشد که دارای ویژگی و قابلیت های بیشتری می باشد. به دلیل ارتباط نیم دو طرفه (Half duplex) و استفاده از روش تفاضلی برای انتقال اطلاعات توسط دو سیم به هم تابیده شده، حساسیت به نویز کمی دارد و در مقابل نویز ایمن می باشد و به همین علت می توان از آن در مواردی که بین دستگاه ها فواصل زیادی وجود دارد، استفاده کرد.
گاهی نیاز هست که دستگاه های دارای این پروتکل ها را از طریق پورت USB به دستگاهی مثل کامپیوتر متصل نمود و اطلاعات خروجی آنها را پردازش نمود. این کار را می توان توسط این ماژول مبدل USB به سریال RS485  که نوعی مبدل usb به پورت سریال rs485 با کیفیت خوب و نویز کم است انجام داد که دارای کاربردهای بسیار در زمینه های مختلف می باشد.

کاربرد ماژول مبدل USB به RS485 :

  1. کنترل لوازم خانگی
  2. انواع اتوماسیون صنعتی، ابزار دقیق
  3. سیستم کنترل دسترسی، سیستم شارژ، سیستم حضور و غیاب و غیره

مشخصات ماژول مبدل USB به سریال RS485 :

  1. محدوده انتقال داده: 115200 ~ 75 بیت بر ثانیه
  2. سازگار با استاندارد USB2.0 و USB1.1
  3. محدوده دمای کارکرد وسیع از منفی 40 تا 85 درجه سانتی گراد
  4. پشتیبانی از اتصال و اجرای سریع USB

مستندات:
دریافت اطلاعات بیشتر ماژول مبدل USB به RS485


Description:
USB to serial adaptors convert the data sent by a serial-enabled device to use by a USB port.
The USB connector plugs into the computer's USB port or a connected USB hub. The data that are transmitted by the serial device is sent directly to the USB port, where it is passed to software to interpret it.
Each adapter cable is sold with a driver, which must be installed before the converter is used.
The software creates a virtual serial port. As data are transmitted through the USB port, they come in as a serial signal. The USB port can recognize the information, but can't do anything with it since it is not a USB signal. The USB port sends the data to the installed software, which searches for the serial data and interprets them for use by other computer programs.
When information is sent to the serial device, it performs the same operation in reverse.
The RS-485 end is a standard 5-screw terminal header for easy connection of single wires.
This particular USB to RS-485 adapter is suitable for most applications, including industrial, commercial and any general office computer device.
It is a bi-directional, (meaning it communicates in both directions), reliable and cost-effective converter that easily lets you connect any RS-485 device directly to your computer's USB port, efficiently converting USB signals to half-duplex RS-485 or vice versa.

Applications:
1. Monitoring data reading and writing and PTZ control
2. Home appliance control
3. Various industrial automation, instrumentation
4. Access control system, charging system, attendance system, etc.

Features:
Support baud rate range: 75-115200bps
Fully compliant with USB 2.0 standard, compatible with USB1.1
Support plug and play and hot plug (USB side)
Extended temperature range from -40°C to +85°C
Communication distance can reach 1.2KM, with industrial site anti-interference ability

485 bus interface:
5p Terminal A-485 device A (D+)
5p Terminal block B--485 device B (D-)
5p Terminal GND2--485 devices GND
از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-915.html
AftabRayaneh©2022