هوالرزاق


دسته بندی
ماژول مبدل سطح ولتاژ دو طرفه 2 بیتی PCA9306
ماژول مبدل سطح ولتاژ دو طرفه 2 بیتی PCA9306 ماژول مبدل سطح ولتاژ دو طرفه 2 بیتی PCA9306 ماژول مبدل سطح ولتاژ دو طرفه 2 بیتی PCA9306 ماژول مبدل سطح ولتاژ دو طرفه 2 بیتی PCA9306

ماژول مبدل سطح ولتاژ دو طرفه 2 بیتی PCA9306

تولید کننده: CJMCU
کد انبار : 7920-509-12249
مدل کالا : CJMCU-9306 PCA9306
جستارش : A1-11-0805A
موجودی: 3
قیمت:
125,560 تومان

تعداد: - +
   - یا -   

ماژول مبدل سطح ولتاژ دو طرفه 2 بیتی PCA9306


Description:
CJMCU-9306 The device is a dual bidirectional I2C and SMBus voltage level translator with an enable input (EN).
and is operational from 1.2 V to 3.3 VV REF2 and 1.8 V to 5.5 VV REF2 .
The PCA9306 device enables bidirectional voltage translations between 1.2V and 5V without the use of a directional pin.
The switch's low on-resistance (RON) enables connections with minimal propagation delay.
When EN is high, the translator switch is on and the SCL1 and SDA1 I/O are connected to the SCL2 and SDA2 I/O.
or enable bidirectional data flow between ports. When EN is low, the translator switch is off
and a high impedance condition exists between ports.
In addition to voltage translation, the PCA9306 device can be used to isolate a 400 kHz bus from a 100 kHz bus controlling the EN pin.
and disconnecting the slower bus during fast mode communication.

Specification :
2-bit bidirectional translator for SDA and SCL lines in mixed-mode I2C-bus applications
Standard-mode, fast-mode and fast-mode plus I2C-bus and SMBus compatible
Less than 1.5 ns maximum propagation delay to accommodate standard-mode and fast-mode I2C-bus devices and multiple leaders
Provides bidirectional voltage translation with no direction pin
Low 3.5 Ω ON-state connection between input and output ports provides less signal distortion
Open-drain I2C-bus I/O ports (SCL1, SDA1, SCL2 and SDA2)
5 V tolerant I2C-bus I/O ports to support mixed-mode signal operation
High-impedance SCL1, SDA1, SCL2 and SDA2 pins for EN = LOW
Lock-up free operation
Flow through pinout for ease of printed-circuit board trace routing
ESD protection exceeds 2000 V HBM per JESD22-A114 and 1000 V CDM per JESD22-C101
Allows voltage-level translation between
– 1.2-V VREF1 and 1.8-V, 2.5-V, 3.3-V,or 5-V VREF2
– 1.8-V VREF1 and 2.5-V, 3.3-V, or 5-V VREF2
– 2.5-V VREF1 and 3.3-V or 5-V VREF2
– 3.3-V VREF1 and 5-V VREF2
از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-7920.html
AftabRayaneh©2022