هوالرزاق


دسته بندی
اپتوکوپلر HCPL-3120
اپتوکوپلر HCPL-3120 اپتوکوپلر HCPL-3120 اپتوکوپلر HCPL-3120

اپتوکوپلر HCPL-3120

کد انبار : 7142-332-11414
مدل کالا : HCPL 3120 Optocoupler
جستارش : A1-11-0805E
موجودی: در حال حاضر موجود نمی باشد. موجودی کالا
قیمت:
41,910 تومان

تعداد: - +
   - یا -   

اپتوکوپلر HCPL-3120 پکیج DIP-8

آی سی HCPL-3120 یک اپتوکوپلر سریع با جریان 2.5 آمپر است که جهت ایزوله سازی خروجی و ورودی مدارات و راه اندازی ترانزیستورهای جریان بالا مانند ماسفت یا IBGT استفاده می شود. سرعت سوئیچینگ بالای اپتوکوپلر hcpl-3120 باعث شده تا از این آی سی 8 پایه در مدارات تغذیه سوئیچینگ مکررا استفاده شود و در حالت لاک-اوت ولتاژ، از مدار محافطت کند.
بر روی این اپتوکوپلر، A3120 حک شده و به همین علت آن را اپتوکوپلر a3120 نیز می نامند.


کاربرد آی سی HCPL-3120:

  1. راه اندازی گیت IGBT/MOSFET
  2. درایو موتورهای دی سی و براشلس AC
  3. اینورترهای صنعتی 
  4. منابع تغذیه سوئیچ

مشخصات ترانزیستور HCPL-3120: 

  1. حداکثر جریان خروجی: 2.5 آمپر
  2. حداکثر ولتاژ خروجی سطح پایین: 0.5 ولت
  3. حداکثر جریان تغذیه: 5 میلی آمپر
  4. محدوده ولتاژ تغذیه: 15 تا 30 ولت
  5. حداکثر سرعت سوئیچینگ: 500 نانو ثانیه
  6. محدوده دمای عملیاتی: 100 ~ 40- درجه سانتی گراد
  7. محافظت در برابر لاک اوت ولتاژ
  8. ولتاژ VCM: هزارو پانصد ولت
  9. بسته بندی: DIP
  10. تعداد پایه: 8 پایه

مستندات:
دیتاشیت hcpl 3120 optocoupler


Description:
The HCPL-3120 contains a GaAsP LED while the HCPL-J312 and the HCNW3120 contain an AlGaAs LED. The LED is optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices. The voltage and current supplied by these optocouplers make them ideally suited for directly driving IGBTs with ratings up to 1200 V/100 A. For IGBTs with higher ratings, the HCPL-3120 series can be used to drive a discrete power stage which drives the IGBT gate.

HCPL-A3120 Application:
IGBT/MOSFET gate drive
AC/Brushless DC motor drives
Industrial inverters
Switch mode power supplies
Features:
2.5 A maximum peak output current
2.0 A minimum peak output current
25 kV/μs minimum Common Mode Rejection (CMR) at VCM = 1500 V
0.5 V maximum low level output voltage (VOL) Eliminates need for negative gate drive
I CC = 5 mA maximum supply current
Under Voltage Lock-Out protection (UVLO) with hysteresis
Wide operating VCC range: 15 to 30 Volts
500 ns maximum switching speeds
Industrial temperature range: –40 °C to 100 °C


از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-7142.html
AftabRayaneh©2022