هوالرزاق


دسته بندی
آی سی مبدل دیجیتال به آنالوگ 12 بیتی TLC5618A
آی سی مبدل دیجیتال به آنالوگ 12 بیتی TLC5618A آی سی مبدل دیجیتال به آنالوگ 12 بیتی TLC5618A آی سی مبدل دیجیتال به آنالوگ 12 بیتی TLC5618A

آی سی مبدل دیجیتال به آنالوگ 12 بیتی TLC5618A

کد انبار : 6788-352-11013
مدل کالا : SOP8-TCL5618AI-DAC
جستارش : A1-02-0409A
موجودی: 3
قیمت:
129,480 تومان

تعداد: - +
   - یا -   

آی سی مبدل دیجیتال به آنالوگ 12 بیتی TLC5618A دارای پکیج SOP8

مبدل دیجیتال به آنالوگ برای تبدیل سیگنال های دیجیتال به آنالوگ به کار می روند. چیپ TCL5618 یک مبدل دیجیتال به آنالوگ با رزولوشن 12 بیت می باشد که دارای دو پورت جهت دریافت خروجی است. آی سی مبدل دیجیتال به آنالوگ 12 بیتی TCL5618A به دو صورت پایه دار یا DIP و SOP ارائه می گردد که این کالا از نوع مبدل دیجیتال به آنالوگ TCL5618A با بسته بندی SOP8 می باشد. این آی سی دارای استفاده ی آسان است که با ولتاژ تک تغذیه عمل می کند.
آی سی مبدل TCL5618A دارای یک ماشین داخلیست که تعداد کلاک های نزولی را می شمارد و خود را برای دریافت ورودی های بیشتری آماده می کند و برای ارتباط با پردازنده هایی با پورت ارتباطی SPI یا سه سیمه مناسب می باشد.

کاربرد آی سی مبدل دیجیتال به آنالوگ 12 بیتی TLC5618A:

  1. تجهیزات تست
  2. آفست های دیجیتال
  3. تجهیزات صنعتی ریموت
  4. تجهیزات تغذیه شده با باتری
  5. دستگاه های کنترل حرکت

مشخصات آی سی DAC 12 بیتی TLC5618A:

  1. ولتاژ تغذیه: 7 ولت
  2. محدوده ولتاژ ورودی: – 0.3 V to VDD +0.3 V
  3. محدوده ولتاژ مرجع: – 0.3 V to VDD + 0.3 V
  4. جریان هر ترمینال: ±20 mA
  5. محدوده دمای کاری: –40°C to 85°C
  6. دارای دو خروجی 12 بیتی
  7. پورت ارتباطی سه سیمه
  8. دارای امپدانس داخلی بالا

مستندات:
دیتاشیت آی سی مبدل TCL5618A


Description:
The TLC5618 is a dual 12-bit voltage output digital-to-analog converter (DAC) with buffered reference inputs (high impedance). The DACs have an output voltage range that is two times the reference voltage, and the DACs are monotonic. The device is simple to use, running from a single supply of 5 V. A power-on reset function is incorporated in the device to ensure repeatable start-up conditions. Digital control of the TLC5618 is over a 3-wire CMOS-compatible serial bus. The device receives a 16-bit word for programming and producing the analog output. The digital inputs feature Schmitt triggers for high noise immunity. Digital communication protocols include the SPI, QSPI, and Microwire standards. Two versions of the device are available. The TLC5618 does not have an internal state machine and is dependent on all external timing signals. The TLC5618A has an internal state machine that counts the number of clocks from the falling edge of CS and then updates and disables the device from accepting further data inputs. The TLC5618A is recommended for TMS320 and SPI processors, and the TLC5618 is recommended only for SPI or 3-wire serial port processors. The TLC5618A is backward-compatible and designed to work in TLC561

Application:
Battery Powered Test Instruments
Digital Offset and Gain Adjustment
Battery Operated/Remote Industrial Controls
Machine and Motion Control Devices

Features:
Programmable Settling Time to 0.5 LSB 2.5 µs or 12.5 µs Typ
Two 12-Bit CMOS Voltage Output DACs in an 8-Pin Package
Simultaneous Updates for DAC A and DAC B
Single Supply Operation
3-Wire Serial Interface
High-Impedance Reference Inputs
Voltage Output Range . . . 2 Times the Reference Input Voltage
Software Powerdown Mode
Internal Power-On Reset TMS320 and SPI
Supply voltage (VDD to AGND) :7 V
Digital input voltage range to AGND: – 0.3 V to VDD +0.3 V
Reference input voltage range to AGND: – 0.3 V to VDD + 0.3 V
Output voltage at OUT from external source: VDD + 0.3 V
Continuous current at any terminal: ±20 mA
Operating free-air temperature range: . –40°C to 85°C
از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-6788.html
AftabRayaneh©2022