برد آردوینو Esplora دارای پردازنده مرکزی ATmega32u4

The Arduino Esplora is a microcontroller board derived from the Arduino Leonardo. The Esplora differs from all preceding Arduino boards in that it provides a number of built-in, ready-to-use set of onboard sensors for interaction. It's designed for people who want to get up and running with Arduino without having to learn about the electronics first. For a step-by-step introduction to the Esplora, check out the Getting Started with Esplora guide. The Esplora has onboard sound and light outputs, and several input sensors, including a joystick, a slider, a temperature sensor, an accelerometer, a microphone, and a light sensor. It also has the potential to expand its capabilities with two Tinkerkit input and output connectors, and a socket for a color TFT LCD screen. Like the Leonardo board, the Esplora uses an Atmega32U4 AVR microcontroller with 16 MHzcrystal oscillator and a micro USB connection capable of acting as a USB client device, like a mouse or a keyboard. In the upper left corner of the board there is a reset pushbutton, that you can use to restart the board.

ON [green] indicates whether the board is receiving power supply

L [yellow] connected directly to the microcontroller, accessible through pin 13

RX and TX [yellow] indicates the data being transmitted or received over the USB communication

The board contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable to get started. The Esplora has built-in USB communication; it can appear to a connected computer as a mouse or keyboard, in addition to a virtual (CDC) serial / COM port.

Teaching and learning microcontroller programming

Development of games and interactive projects

Robotics projects

Environmental and assessment projects

Control and monitoring via USB

Supply voltage: 5V

Connector type: USB

Chip: Atmega32u4

Display type: with LCD TFT connector

Flash memory: 32 KB

SRAM memory: 2.5 KB

EEPROM memory: 1 KB

With sensors: light sensor and temperature sensor

Speed: 16 MHz

Other features: Joystick, linear potentiometer, RGB LED, 3-axis accelerometer, 4 switches