ماژول کنترل دور موتور DC دارای خروجی PWM

ماژول کنترل دور موتور DC دارای خروجی PWM با ولتاژ DC 6-90 V

کاربرد ماژول کنترل دور موتور DC دارای خروجی PWM:

1. کنترل کننده سرعت موتور دی سی
2. کنترل دور اسپیندل

مشخصات ماژول کنترلر و تنظیم کننده سرعت موتور:

1. ولتاژ ورودی: 6 ~ 90 ولت DC
2. جریان خروجی: 0 تا 15 آمپر
3. جریان مداوم: 10 آمپر
4. نوع تنظیم سرعت: Current regulation
5. ابزار تنظیم سرعت: پتانسیومتر خطی 10K
6. محدوده سرعت مدولاسیون پهنای پالس: 0 تا 100 درصد
7. فرکانس کنترل: 16 کیلوهرتز
8. نوع سیم بندی: Fence Terminal Block
9. محافظت: محافظت در برابر ولتاژ بیش از اندازه و پلاریته توان معکوس
10. مجهز به فیوز سرامیکی 20 آمپر

مستندات:
عملرد کنترلر موتور جریان بالا با پتانسیومتر

Description:
This PWM DC motor speed controller and regulator module with the voltage range of 6V to 90V and the current rating of 15A is a large-current motor controller with a high-quality potentiometer. It has High-quality materials which is durable and Eco-friendly.
For assembling a robot, you must learn about controlling a variety of motors like DC motors, Stepper motors, and servos. If you want to have complete control over DC motor, you must control its speed and rotation direction. This can be acquired by applying these two solutions, together: PWM (For controlling speed) and H-Bridge (For controlling rotation direction). The DC motor speed can be controlled by varying its input voltage. An easy way to vary its input voltage is PWM (Pulse Width Modulation). PWM is a technique where the average value of the input voltage is adjusted by applying a series of ON-OFF pulses. The average voltage is proportional to the width of the pulses named as the Duty Cycle.
Speed regulators have been widely used in industrial DC motor speed regulation, industrial belt speed regulation, lighting regulation, computer power cooling, DC fan, etc.

Note:
1. DC motor speed regulator input is DC, can not be directly connected to AC (for example household 220V AC), otherwise, it will burn.
2. do not reverse connect the positive and negative terminals of the DC power supply, otherwise, the speed regulator may be damaged.
3. the motor can not be divided into positive and negative when the direction of operation is not consistent with expectations, you can adjust the line sequence to change the direction easily.

Features:                               
Input Voltage: DC 6V-90V
Output Voltage: Linear under load  
Power: 0.01-1000W                   
Output Current: 0-15A
Protection: Power reverse protection - Voltage overvoltage protection
Continuous Current: 10A                            
Speed Regulation Type: Current regulation
Speed Regulation Mode: Potentiometer (linear)               
PWM pulse speed range: 0% -100%
Control Frequency: 16KHZ  
20A fast melting ceramic fuse             
Wiring Type: Fence Terminal Block
Knob Line Length: 20CM                          
Module Size: 71MM * 61MM * 31MM                            
Motherboard Mounting Size: 53MM * 63MM