بسته 5 تایی پین هدر 1X40 نری مستقیم - فاصله پین 2.54 میلی متر

Pin header is a type of electrical connector. This connector is widely used in electronic or instrumentation of PCB (Print Circuit Board) function as a bridge between two PCBs which were blocked and used to take a current or signal transmission.

Pin headers are often associated with ribbon cable connectors, pin headers often also function as recipients for jumpers. The most common jumper spacing is 2.54 millimeters (0.1 in), though 2.0 millimeters (0.079 in) are sometimes used in smaller products.

The Contact materials usually made with Brass, Phosphor Bronze, and other material like Beryllium or Copper Alloy.

Pin headers with a plastic guide box around them are known as box headers (BH) or shrouded headers and are normally only used in combination with insulation-displacement connectors (IDC) for ribbon cables. A notch (key) in the guide box normally prevents placing the connector (polarised by a "bump" on one side) the wrong way around.

There are totally three versions of connectors: Straight (Dip or Vertical) pin header connector, Right-angle (90 degrees) pin header connector and SMT (surface mount, SMD) pin header connector.

Name: Single Row Male

Pin Pitch: 2.54mm

Pin Numbers: 1x40