هوالرزاق


دسته بندی
نمایشگر پرینتر های سه بعدی RepRap Smart Controller
نمایشگر پرینتر های سه بعدی RepRap Smart Controller نمایشگر پرینتر های سه بعدی RepRap Smart Controller نمایشگر پرینتر های سه بعدی RepRap Smart Controller نمایشگر پرینتر های سه بعدی RepRap Smart Controller نمایشگر پرینتر های سه بعدی RepRap Smart Controller نمایشگر پرینتر های سه بعدی RepRap Smart Controller نمایشگر پرینتر های سه بعدی RepRap Smart Controller نمایشگر پرینتر های سه بعدی RepRap Smart Controller

نمایشگر پرینتر های سه بعدی RepRap Smart Controller

کد انبار : 673-167-1704
مدل کالا : Smart Controller
موجودی: در حال حاضر موجود نمی باشد. موجودی کالا
قیمت:
430,100 تومان

تعداد: - +
   - یا -   

نمایشگر ( LCD ) پرینتر های سه بعدی RepRap Smart Controller

نمایشگر (LCD 2004) پرینترهای سه بعدی RepRap Smart Controller به دلیل پشتیبانی از SD کارت بسیار مورد استفاده قرار می‌گیرد. اتصال این نمایشگر از طریق کابل به Ramps 1.4 و کنترل هوشمند از طریق SD کارت موجب شده دیگر نیازی به کامپیوتر برای راه‌اندازی این محصول نباشد. به وسیله این نمایشگر می‌توان تمام طراحی‌های خود را از طریق g کد بر روی SD کارت ذخیره کرده و بدون نیاز به کامپیوتر آن‌ها را پرینت کرد. از مهمترین ویژگی‌ این محصول می‌توان به کالیبراسیون و نمایش حرکت محور‌ها با استفاده از انکودر چرخشی کنترلر هوشمند اشاره کرد که موجب شده این نمایشگر از محبوبیت بالایی در بین کاربران برخوردار باشد.


کاربرد ماژول LCD کاراکتری 4x20:

  1. پرینترهای سه بعدی
  2. مصارف صنعتی


مشخصات ماژول LCD کاراکتری 4x20:

  1. دارای Reader
  2. دارای اینکودر گردان جهت حرکت در منوها
  3. دارای Buzzer
  4. دارای نمایشگر کاراکتری ۲۰*۴ ( ۴ سطر و ۲۰ کاراکتر در هر سطر )
  5. دارای دکمه Reset
  6. با استفاده از اینکودر موجود روی بورد براحتی می توانید در منو های دستگاه حرکت کرده و به اطلاعات آنها دسترسی داشته باشید.
  7. طرح های سه بعدی خود را می توانید بدون نیاز به کامپیوتر از طریق SD-Card به این بورد متصل کنید تا پرینتر آنها را اجرا کند.
  8. تغذیه مورد نیاز SD-Card reader نیز توسط خود بورد تامین خواهد شد .
  9. نمایشگر پرینتر های سه بعدی  بطور کامل با کنترلر  RAMPS 1.4 و فریمور های Marlin و Repetier سازگار می باشد.

مستندات:
نقشه کامل شیلد نمایشگر کاراکتری 4x20


Description:
This Smart Controller contains an SD-Card reader, a rotary encoder and a 20 Character x 4 Line LCD display. You can easily connect it to your Ramps board using the "smart adapter" included.
After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card. Furthermore, all actions like calibration and axes movements can be done by just using the rotary encoder on the Smart Controller. You can print your 3D designs without PC, just with a g-code design stored on the SD card.
The SPLC780D, a dot-matrix LCD controller and driver from SUNPLUS is a unique design for displaying alpha-numeric, Japanese-Kana characters and symbols. The SPLC780D provides two types of interfaces to MPU: 4-bit and 8-bit interfaces.
The transferring speed of 8-bit is twice faster than 4-bit. A single SPLC780D is able to display up to two 8-character lines. By cascading with SPLC100 or SPLC063, the display capability can be extended. The CMOS technology ensures the power saves in
the most efficient way and the performance keeps in the highest rank.

Features:
Using large screen LCD 2004
Integrated SD card holder on the back. (After inserting the slice file into the SD card, select the corresponding file on the LCD and print)
The product comes with an encoder, which can realize parameter adjustment and file selection and printing.
(1) Display mode: STN Positive, Transflective, Yellow-green color
(2) Display format: 20 characters X 4 line
(3) Driving method: 1/16 Duty, 1/5 Bias
(4) Backlight: LED (Yellow-Green ) 5) Control IC: SPLC780D
(6) Interface Input Data: 4-Bits or 8-Bits interface available
The RAMPS LCD2004 kit contains the following:
1x RAMPS LCD2004 Motherboard
1x L Type Adapter Board
2x FC Cable
از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-673.html
AftabRayaneh©2022