ماژول سنسور تشخیص حرکت مایکروویو

The output of the microwave module is a level signal, high and low level, which can also be called a switching value. The current is 25mA, which is not enough to drive a direct load. Generally, it is connected to the signal input port of the single-chip microcomputer or connected to the trigger pin of the relay module. Control the on and off of other lines through the normally open and normally closed contacts of the relay module (normally open means that it is normally off, and the signal becomes on, otherwise, the normally closed is usually on and the signal is off). Therefore, if you want to control the lamps, you need to choose a relay combination.

According to the actual measurement of this short-distance module, the human body sensing distance can be controlled within 0.2 meters and the maximum can be adjusted to 4 meters.

Intelligent detection detector

human body induction module

microwave radar inductive switch module

IOT

Microwave frequency: 5.8GHZ

Detecting Distance: 0.2~4 m

Min Distance: 0.2m

Dimension: 50 * 16 mm

Angle Detection: 90 degree