ماژول انکدر 12 بیتی AS5600

The AS5600 is an easy to program magnetic rotary position sensor with a high-resolution 12-bit analog or PWM output. This contactless system measures the absolute angle of a diametric magnetized on-axis magnet. This AS5600 is designed for contactless potentiometer applications and its robust design eliminates the influence of any homogenous external stray magnetic fields.

The industry-standard I²C interface supports simple user programming of non-volatile parameters without requiring a dedicated programmer.

By default the output represents a range from 0 to 360 degrees. It is also possible to define a smaller range to the output by programming a zero angle (start position) and a maximum angle (stop position).

The AS5600 is also equipped with a smart low power mode feature to automatically reduce the power consumption.

An input pin (DIR) selects the polarity of the output with regard to rotation direction. If DIR is connected to ground, the output value increases with clockwise rotation. If DIR is connected to VDD, the output value increases with counterclockwise rotation.

Three signal output methods: lIC bus, PWM or analog output. It supports 3.3V voltage by default, and 5V voltage can be used by disconnecting the R6 resistor. The IIC interface is used by default, and the PGO pin is grounded to use PWM/analog output. By default, the value increases by clockwise rotation, and the R4 resistance is welded to the R3 pad, and the value increases by counterclockwise rotation. Compatible with motor brackets of various sizes. Type: Magnetic encoder module Voltage: 3.3V and 5VInterface: PH2.0 4pinOutput mode: lIC bus, PWM or analog output Material: PCBcolor: bluePackage Contents:1 x Module1 x Magnet Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.