هوالرزاق


دسته بندی
ماژول معکوس کننده ولتاژ LM2662
ماژول معکوس کننده ولتاژ LM2662 ماژول معکوس کننده ولتاژ LM2662 ماژول معکوس کننده ولتاژ LM2662

ماژول معکوس کننده ولتاژ LM2662

کد انبار : 2137-136-3618
مدل کالا : LM2662 Module
جستارش : A1-02-0209D
موجودی: 5
قیمت:
71,240 تومان

تعداد: - +
   - یا -   

ماژول منفی کننده ولتاژ LM2662 دارای دامنه ورودی 1.5V تا 5V

اگر به یک راه سریع برای دسترسی به ولتاژ پایین منفی روی برد بدون لحیم کاری یا پلت فرم نمونه سازی خود نیاز دارید، مبدل ولتاژ مثبت به منفی LM2662 مشکل را حل میکند.
ماژول معکوس کننده ولتاژ LM2662 ولتاژ مثبت بین 1.5 تا 5.5 ولت DC را می پذیرد و یک ولتاژ منفی منطبق بین 1.5- و 5.5- ولت DC تا 200 میلی آمپر را خروجی می دهد.
در این ماژول با اضافه کردن خازن مناسب به پایه OSC میتوان فرکانس اسیلاتور را به سطح پایین تری تبدیل کرد و از پایه FC فرکانس کار 20 یا 150 کیلوهرتزی انتخاب کرد.

از ماژول تغییر پلاریته LM2662 در تغذیه ماژول های تقویت کننده عملیاتی، تجهیزات پزشکی، کامپیوترها و تجهیزات الکترونیکی قابل حمل استفاده می شود.


کاربرد آی سی LM2662:

  1. کامپیوتر و لب تاب
  2. تلفن هوشمند
  3. تجهیزات پزشکی
  4. منابع تغذیه تقویت کننده عملیاتی
  5. اینترفیس های منبع تغذیه
  6. تجهیزات قابل حمل

مشخصات آی سی LM2662:

  1. منفی کننده ولتاژ ورودی
  2. محدوده ولتاژ: 1.5 تا 5 ولت
  3. جریان خروجی: 200 میلی آمپر
  4. جریان شات دان: 10 میکرو آمپر
  5. آی سی 8 پایه
  6. بازدهی 86 درصدی
  7. اسیلاتور قابل تنظیم
  8. مقاومت خروجی: 3.5 اهم

مستندات:
دیتاشیت ماژول منفی کننده ولتاژ LM2662


Description:
LC LM2662 positive pressure conversion negative pressure module carry a LM2662 high precision voltage conversion chip, it can conversion 1.5V-5.5V Positive voltage to corresponding the negative voltage.
The LM2662/LM2663 CMOS charge-pump voltage converter inverts a positive voltage in the range of 1.5V to 5.5V to the corresponding negative voltage. The LM2662/LM2663 uses two low cost capacitors to provide 200 mA of output current without the cost, size, and EMI related to inductor
based converters. With an operating current of only 300 µA and operating efficiency greater than 90% at most loads, the LM2662/LM2663 provides ideal performance for battery powered systems. The LM2662/LM2663 may also be used as a positive voltage doubler.
The oscillator frequency can be lowered by adding an external capacitor to the OSC pin. Also, the OSC pin may be used to drive the LM2662/LM2663 with an external clock. For LM2662, a frequency control (FC) pin selects the oscillator frequency of 20 kHz or 150 kHz. For LM2663, an external
shutdown (SD) pin replaces the FC pin. The SD pin can be used to disable the device and reduce the quiescent current to 10 µA. 

Application:
Laptop computers
Cellular phones
Medical instruments
Operational amplifier power supplies
Interface power supplies
Handheld instruments

Features:
Supply Voltage: 3.5 ~ 5.5v
Input inverter voltage: 1.5 ~ 5.5v
output current: 200mA
Shutdown current: 10uA
Inverts or doubles input supply voltage
Narrow SO-8 Package
3.5Ω typical output resistance
86% typical conversion efficiency at 200 mA
(LM2662) selectable oscillator
frequency: 20 kHz/150 kHz
low current shutdown mode
از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-2137.html
AftabRayaneh©2022