هوالرزاق


دسته بندی
استپر موتور Nema14 دو فاز 1.8 درجه 0.6A دارای انکودر
استپر موتور Nema14 دو فاز 1.8 درجه 0.6A دارای انکودر استپر موتور Nema14 دو فاز 1.8 درجه 0.6A دارای انکودر استپر موتور Nema14 دو فاز 1.8 درجه 0.6A دارای انکودر استپر موتور Nema14 دو فاز 1.8 درجه 0.6A دارای انکودر استپر موتور Nema14 دو فاز 1.8 درجه 0.6A دارای انکودر استپر موتور Nema14 دو فاز 1.8 درجه 0.6A دارای انکودر

استپر موتور Nema14 دو فاز 1.8 درجه 0.6A دارای انکودر

کد انبار : 5668-93-9112
مدل کالا : APH9000905
جستارش : A1-04-0803B
موجودی: 3
قیمت:
599,920 تومان

تعداد: - +
   - یا -   

استپر موتور Nema14 دو فاز 1.8 درجه 0.6A دارای انکودر

استپر موتورهای Nema14 دارای ابعاد استاندارد بوده و قدم‌های کوچکی را در هر چرخش انجام می‌دهند (به اندازه 1.8 درجه). جریان 0.6 آمپر نیز، جریان مصرفی موتور در حالت عادی را نشان می‌دهد.
همچنین، این استپر موتور دارای انکودر است. انکودر یک دستگاه حسگری است که استفاده می‌شود تا مکان و سرعت چرخش موتور را اندازه‌گیری کند. با استفاده از اطلاعات ارائه شده توسط انکودر، می‌توانید مکان و جابجایی دقیقی را برای موتور تعیین کنید.
استپر موتور  Nema14 دو فاز 1.8 درجه با جریان 0.6A و همراه با انکودر در بسیاری از کاربردها مورد استفاده قرار می‌گیرد.به طور مثال استپر موتورها از محرک‌های پرکاربرد در رباتیک هستند. برای حرکت دقیق با قدم‌های مشخص، کارهای پیشرفته مکانیکی مثل بالابرها، بازوهای رباتیک، پلتفرم‌های حرکتی و... همچنین به دلیل دقت زیاد و زاویه قدم کوچک، استپر موتورها برای کاربردهای دقیقی مانند دستگاه‌های قطعه‌سازی، دستگاه‌های خم کاری لوله، دستگاه‌های عینک سازی، دستگاه‌های آزمایشگاهی،دستگاه‌های دقیق پزشکی، پرینترها و سیستم‌های چاپ ، سیستم‌های اتوماسیون صنعتی مانند ماشین‌آلات تولید، خطوط تولید، ربات‌های صنعتی و سیستم‌های کنترلی استفاده می‌شوند. 
این ها فقط تعدادی از کاربردهای استپر موتور  Nema14 دو فاز 1.8 درجه با جریان 0.6A و همراه با انکودر هستند. این موتورها به علت دقت، کنترل قابل برنامه‌ریزی و ساختار کوچک مناسب برای بسیاری از صنایع و کاربردها می‌باشد.

کاربرد استپر موتور Nema14:

  1. رباتیک
  2. پرینتر سه بعدی
  3. دستگاه‌های دقیق پزشکی
  4. دستگاه‌های اتوماسیون صنعتی

مشخصات استپر Nema14 دو فاز:

  1. نوع موتور: استپر موتور Nema14 دو فاز
  2. انکودر: دارای انکودر
  3. زاویه قدم: 1.8 درجه
  4. جریان: 0.6 آمپر

Description:
The Encoder 35 stepper motor is a two-phase, stepper motor with a code disc and a step angle of 1.8 degrees. This type of stepper motor is commonly used in various applications such as robotics, 3D printers, CNC machines, and automation systems. It combines the precise step control of a stepper motor with the feedback capabilities of an encoder.
Here is some content about the Encoder 35 stepper motor along with its code disc and step angle:
Working Principle: The Encoder 35 stepper motor operates on the principle of electromagnetism. It consists of two coils, known as the stator windings, which generate a magnetic field. The rotor, also known as the code disc, contains permanent magnets. By energizing the stator windings in a specific sequence, the rotor rotates incrementally, resulting in precise angular movement.
Two-Phase, 4-Wire Configuration: The Encoder 35 stepper motor has a two-phase configuration, meaning it requires two sets of windings to function. Each winding is typically connected to a pair of wires, resulting in a total of four wires. This configuration allows for more precise control over the motor's movement.
Code Disc: The Encoder 35 stepper motor incorporates a code disc, which is mounted on the rotor shaft. The code disc features slots or markings that can be detected by sensors or optical encoders. These slots provide positional information, allowing for accurate feedback and closed-loop control of the motor's position.
Step Angle: The step angle of the Encoder 35 stepper motor is 1.8 degrees per step. This means that for every electrical pulse sent to the motor, it will rotate by 1.8 degrees. The small step angle enables smooth and precise motion control, making it suitable for applications that require accurate positioning.
Control and Programming: To control the Encoder 35 stepper motor, you will need a stepper motor driver or controller. The driver receives step and direction signals from a microcontroller or other control circuitry to determine the motor's rotation. Additionally, if you wish to utilize the encoder feedback, you will need to interface with an encoder reader module or integrate the necessary code for reading the encoder signals.

Applications:
Robotics
CNC machines
Automation systems
3D printers

Features:
Name: two-phase 4-wire 35 stepper motor
Phase resistance:18 ohms
Step angle:1.8 °
Phase current:0.6A
از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-5668.html
AftabRayaneh©2022