ماژول مبدل سطح ولتاژ دو طرفه 4 بیتی TXB0104

This 4-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V,1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB.

When the output-enable (OE) input is low, all outputs are placed in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver. The TXB0104 is designed so that the OE input circuit is supplied by VCCA.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

Application:
Headset
smartphone
Tablet
Desktop PC

Features:
1.2 V to 3.6 V on A Port and 1.65 V to 5.5 V on B Port (VCCA ≤ VCCB)

• VCC Isolation Feature – If Either VCC Input Is atGND, All Outputs Are in the High-Impedance track VCCB. VCCB accepts any supply voltage from State

• OE Input Circuit Referenced to VCCA

• Low Power Consumption, 5-μA Max ICC

• Ioff Supports Partial-Power-Down Mode Operation

• Latch-Up Performance Exceeds 100 mA Per JESD 78 Class ll

• ESD Protection ESD22

A port

- 2500v Human body model(A114-B)

-1500V Charged device model(C101)

B Port

- +-15kV Human body model(A114-B)

-1500V Charged device model(C101)