هوالرزاق


دسته بندی

برد کنترلر دستگاه CNC و برش لیزر 9 محور دارای پورت USB و قابلیت پشتیبانی از نرم افزار USBCNC

کد انبار : 4249-242-6707
مدل کالا : MK2-9Axis
جستارش : A2-06-0102A
موجودی: 1
قیمت:
1,313,250تومان

تعداد: - +
   - یا -   

برد کنترلر دستگاه CNC و برش لیزر  9 محور دارای پورت USB و قابلیت پشتیبانی از نرم افزار USBCNC

 

Specifications

 Incoming motor and servo motor drivers that support all     pulse /direction     control signal inputs
4-axis 9-axis output, up to 100K frequency output per axis, servo
Support 7-channel control signal output, spindle control, cooling, spray, and tool change control
Support 5 channels of control signal input - open, pause, stop, emergency stop, tool setting signal interface;
Support hardware 4 axis 8 direction limit input
Support soft limit
Support for backlash
Support 4-axis linkage, true four-axis linkage;
Support SD card, run offline, the tool path file can be greater than 100M;
Support straight line, circular interpolation
Support manual control panel to control 4-axis motion, support jog stepping mode
Support 3-axis electronic handwheel (customized)
 Supports Windows XP , Vista , Windows 7 , 8 or 8.1 ( 32 -bit or 64- bit) desktop / laptop USB (V2.x)
  Standard RS274/NGC G code (compatible with EMC2 and Linuxcnc )
  Support advanced G code - G40 , G41 , G42 (tool radius compensation)
 Support for advanced G code - G43 , G49 (tool length offset)
 Support for advanced G code - G54 , g59.3 (origin of coordinate system)
  Compatible with G- code generated by software such as SolidCAM, MasterCAM, ArtCAM, Vectric, CamBam, MeshCAM
  G code supporting Profili4 axis and 3 axes
 Support DXF file to directly generate tool path
 Support PLT/HPGL file import to directly generate tool path
Support NC-Drill ( Excellon ) file import to directly generate tool tracks
 Support Gerber ( RS-274x ) file import to directly generate tool path
 Tool path simulation
 Automatic coordinate zero return procedure
  Supported tool change program
  Automatic measurement of tool length
 Export tool path to G code

از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-4249.html
AftabRayaneh©2017