هوالرزاق


دسته بندی
ماژول سنسور تعقیب خط مادون قرمز TCRT5000L
ماژول سنسور تعقیب خط مادون قرمز TCRT5000L ماژول سنسور تعقیب خط مادون قرمز TCRT5000L ماژول سنسور تعقیب خط مادون قرمز TCRT5000L ماژول سنسور تعقیب خط مادون قرمز TCRT5000L ماژول سنسور تعقیب خط مادون قرمز TCRT5000L

ماژول سنسور تعقیب خط مادون قرمز TCRT5000L

کد انبار : 1916-103-3347
مدل کالا : TCRT5000L module
جستارش : A1-03-0702A
موجودی: 40
قیمت:
20,560 تومان

تعداد: - +
   - یا -   

ماژول سنسور تعقیب خط مادون قرمز TCRT5000L

ماژول TCRT5000L مداری برای تشخیص موانع است که بر اساس مادون قرمز عمل می کند و به روش رفلکتیو، موانع و اجسام را از فاصله 0.2 تا 40 سانتی متری تشخیص می دهد.

این ماژول بر اساس آی سی TCRT5000L ساخته شده و برای راه اندازی نیاز به ولتاژ کار 3.3 تا 5 ولت دارد و خروجی آن به صورت TTL و از طریق اینترفیس 4 سیمه با میکروکنترلرها ارتباط برقرار می کند.


کاربرد ماژول مادون قرمز TCRT5000L:

  1. پالس شمار
  2. تشخیص ورود کاغذ در فکس
  3. تشخیص مانع
  4. تشخیص خط

مشخصات ماژول مادون قرمز TCRT5000L:

  1. فاصله تشخیص مانع: 0.2 تا 40 سانتی متر
  2. ولتاژ کار: 3.3V-5V
  3. جریان کار: بیش از 20 میلی آمپر
  4. اینترفیس ارتباطی: سیم 4تایی
  5. خروجی: TTL
  6. قابل تنظیم با مولتی ترن
  7. زاویه تشخیص: 35 درجه
  8. ابعاد: 28mm×23mm
  9. روش تشخیص: رفلکتیو

مستندات:
دیتاشیت آی سی TCRT5000L


Description:
The TCRT5000 and TCRT5000L are reflective sensors which include an infrared emitter and phototransistor in a leaded package which blocks visible light. The package includes two mounting clips. TCRT5000L is the long lead version.
Infrared obstacle avoidance sensor is designed for the design of a wheeled robot obstacle avoidance sensor distance adjustable. This ambient light sensor adaptable, high precision, having a pair of infrared transmitter and receiver, transmitter tubes emit a certain frequency of infrared, When detecting the direction of an obstacle (reflector), the infrared receiver tube receiver is reflected back, when the indicator is lit, Through the circuit, the signal output interface output digital signal that can be detected by means of potentiometer knob to adjust the distance, the effective distance from 2 ~ 40cm, working voltage of 3.3V-5V, operating voltage range as broad, relatively large fluctuations in the power supply voltage of the situation stable condition and still work for a variety of microcontrollers, Arduino controller, BS2 controller, attached to the robot that can sense changes in their surroundings.


Application:
Position sensor for shaft encoder
Detection of reflective material such as paper, IBM cards, magnetic tapes etc.
Limit switch for mechanical motions in VCR
General purpose - wherever the space is limited


Features:
Working voltage: DC 3.3V-5V
Working current: ≥ 20mA
Operating temperature: -10℃~+50℃
detection distance :2-40cm
IO Interface: 4-wire interfaces (-/+/S/EN)
Output signal: TTL level (low level there is an obstacle, no obstacle high)
Adjustment: adjust multi-turn resistance
Effective angle: 35°
Size: 28mm×23mm 
Product Type: Optical Switches, Reflective, Phototransistor Output
Sensing Method: Reflective
از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-1916.html
AftabRayaneh©2022