هوالرزاق


دسته بندی
ماژول نمایشگر LCD TFT فول کالر 1.44 اینچ دارای چیپ درایور ILI9163
ماژول نمایشگر LCD TFT فول کالر 1.44 اینچ دارای چیپ درایور ILI9163 ماژول نمایشگر LCD TFT فول کالر 1.44 اینچ دارای چیپ درایور ILI9163 ماژول نمایشگر LCD TFT فول کالر 1.44 اینچ دارای چیپ درایور ILI9163

ماژول نمایشگر LCD TFT فول کالر 1.44 اینچ دارای چیپ درایور ILI9163

کد انبار : 1110-72-2298
مدل کالا : E1B3
جستارش : A2-15-1004B
موجودی: 4
قیمت:
211,900 تومان

تعداد: - +
   - یا -   

ماژول نمایشگر LCD TFT فول کالر 1.44 اینچ دارای چیپ درایور ILI9163

ماژول نمایشگر LCD از نوع TFT و دارای رزولوشن 128*128 است. این نمایشگر دارای تناسب 1:1 بوده و صفحه ی آن مربعی شکل است. نمایشگر 1.44 اینچی TFT ، تمام رنگی است و نسبت به سایر صفحه نمایش های کوچک CSTN بهتر است. اندازه ماژول نمایشگر 1.44 اینچ می باشد که کیفیت خوبی دارد. رابط این نمایشگر سریال باس SPI است. این نمایشگر برای به کار گیری با آردوینو مناسب است.
از این نمایشگرها با توجه به وضوح ئ رزولوشن خوبی که دارند در سیستم های امبدد، تجهیزات صنعتی، تجهیزات امنیتی و صفحه نمایش هایی با کیفیت بالا استفاده می گردد.
درایور این نمایشگر تراشه ی ILI9163 می باشد که برای نمایشگرهای کریستال مایع بسیار مناسب است.

کاربرد نمایشگر 1.44 اینچی:

  1. تجهیزات صنعتی
  2. تجهیزات امنیتی


مشخصات نمایشگر 1.44 اینچی TFT:

  1. اندازه صفحه نمایش: 1.44 اینچ
  2. فضای قابل رویت: 1.1 اینچ
  3. آی سی درایور: ILI9163
  4. ولتاژ تغذیه: 5 ~ 3.3 ولت
  5. اندازه PCB بورد: 32 × 45 میلی متر
  6. سازگار با درگاه 5110

مستندات:
کتابخانه نمایشگر 1.44 اینچی
چیپ درایور ILI9163


Description:
The ILI9163C full color TFT display module is an SPI protocol based display with a resolution of 128*128 pixels and 1.44 inch size. It displays up to 262,000 different colors. The module may be considered as a sibling to the 1.8″ TFT display, by this fact that it is much faster and is more cost efficient than the 1.8″ TFT display.
The TFT display communicates with the microcontroller over SPI protocol, so you need to connect it to the SPI pins of the Arduino. Before connecting it directly to the 5v logic level of the Arduino, ensure that it has a voltage regulator. Because the display may be destroyed if the version of the display you have does not have the regulator. If the display does not have a voltage regulator, you can use any logic level converter between the display and the Arduino.
It can be used in any embedded systems, an industrial device, security and hand-held equipment which requires display in high quality and colorful image.
ILI9163 Chihp driver is a 262,144-color one-chip SoC driver for a-TFT liquid crystal display with resolution of 132RGBx162 dots, comprising a 396-channel source driver, a 162-channel gate driver, 48,114bytes GRAM for graphic data of 132RGBx162 dots, and power supply circuit.  


Features:

Display Size: 1.44″
Viewable area:  1.1″
Driver IC: ILI9163
Input Voltage: 3.3 ~ 5 V
Pixel Resolution: 128 x 128
PCB Size (mm): 45 × 32 (LxW)
Compatible with : 5110 interface

از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-1110.html
AftabRayaneh©2022