هوالرزاق


دسته بندی
نمایشگر LCD کاراکتری 1602 دارای رنگ زمینه آبی و ولتاژ کاری 5 ولت
نمایشگر LCD کاراکتری 1602 دارای رنگ زمینه آبی و ولتاژ کاری 5 ولت نمایشگر LCD کاراکتری 1602 دارای رنگ زمینه آبی و ولتاژ کاری 5 ولت نمایشگر LCD کاراکتری 1602 دارای رنگ زمینه آبی و ولتاژ کاری 5 ولت

نمایشگر LCD کاراکتری 1602 دارای رنگ زمینه آبی و ولتاژ کاری 5 ولت

کد انبار : 202-72-1157
مدل کالا : 1602A-5v
جستارش : B2-02-0303A
موجودی: 170
قیمت:
69,330 تومان

تعداد: - +
   - یا -   

نمایشگر LCD کاراکتری 1602 دارای رنگ زمینه آبی و ولتاژ کاری 5 ولت

نمایشگر LCD کاراکتری 1602 دارای رنگ زمینه آبی و ولتاژ کاری 5 ولت دارای 2 سطر 16 کاراکتری می باشد که می تواند به کمک پتانسیومتر متصل شده به پایه 2 میزان کنتراست را تغییر دهد. نور پس زمینه این LCD را می توان با پایه های 15 و 16 کم یا زیاد کرد. برای برقراری ارتباط این LCD با آردوینو، 6 پایه E,RS,DB4,DB5,DB6,DB7 مورد استفاده قرار می گردد.
در این نوع از LCD های کریستال مایع، علاوه بر نمایش حروف واعداد، امکان نمایش 8 کاراکتر ساخته شده توسط کاربر وجود دارد.
این نمایشگر دارای زاویه دید و وضوح بالا می باشد.

کاربرد LCD کاراکتری 1602 :

  1. ماشین های فکس
  2. پرینترهای لیزری
  3. تجهیزات اندازه گیری صنعتی
  4. وسایل های شبکه سازی مانند روتور و دستگاه های ذخیره سازی

مشخصات نمایشگر کاراکتری مدل 1602A-5v :

  1. مجهز به کنترل کننده صنعتی Hitachi HD44780 نصب شده روی ماژول
  2. نوع LCD: دات ماتریس کاراکتری (بک لایت کریستال مایع)
  3. نوع نمایش: 2 خط 16 کاراکتری
  4. ولتاژ: 5 ولت DC
  5. اندازه ماژول: 11 × 35 × 80 میلی متر
  6. اندازه ناحیه دید: 16 × 64.5 میلی متر

مستندات:
مشاهده سیم بندی LCD 1602 و دانلود نمونه کد آردوینو


Description:
1602 character-type liquid crystal display, is a kind of dot matrix module to show letters, numbers, characters, and so on. It's composed of dot matrix positions; each position can display one character.
There's a dot pitch between two characters and a space between lines, thus separating characters and lines. The model 1602 means it displays 2 lines of 16 characters.
Generally, LCD1602 has parallel ports, that is, it would control several pins at the same time. LCD1602 can be categorized into eight-port and four-port connections.
If the eight-port connection is used, then all the digital ports of the SunFounder Uno board are almost completely occupied. If you want to connect more sensors, there will be no ports available. Therefore, the four-port connection is used here for better application.
Additionally, wire a 10k pot to +5V and GND, with its wiper (output) to LCD screens VO pin (pin3). A 220-ohm resistor is used to power the backlight of the display, usually on pin 15 and 16 of the LCD connector. It is also possible to write custom characters to the LCD. It supports up to 8 characters of 5×8 pixels.
There are some functions that help you to control the LCD which comes as following:
The setCursor() function is used for setting the location at which subsequent text written to the LCD will be displayed. The blink() function is used for displaying a blinking cursor and the noBlink() function for turning off. The cursor() function is used for displaying underscore cursor and the noCursor() function for turning off. Using the clear() function we can clear the LCD screen.
You can find and the functions of the library which enable easy use of the LCD From Arduino’s official website.

Application:
It can be used for:
Fax
printers
industrial measurement equipment
networking machines
Audio systems

Features:
LCD Controller: Built-in Industry standard HD44780
LCD Type: Dot Matrix Characters (Backlight)
Display: 2 lines × 16 characters
Voltage: +5V DC
Module Dimension: 80mm x 35mm x 11mm
Display size: 64.5mm x 16mm
از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-202.html
AftabRayaneh©2022