هوالرزاق


دسته بندی
رله حالت جامد 40A تک فاز
رله حالت جامد 40A تک فاز رله حالت جامد 40A تک فاز رله حالت جامد 40A تک فاز رله حالت جامد 40A تک فاز

رله حالت جامد 40A تک فاز

کد انبار : 949-73-2099
مدل کالا : SSR-40DA
موجودی: در حال حاضر موجود نمی باشد. موجودی کالا
قیمت:
128,910 تومان

تعداد: - +
   - یا -   

رله حالت جامد 40A تک فاز ( SSR-40DA )

رله حالت جامد SSR یک کلید الکترونیکی است که در آن از قطعات نیمه هادی قدرت مانند تریستور، ترایاک و ترانزیستور استفاده شده است. این دسته از رله ها همانند رله های معمولی از دو بخش قدرت و فرمان تشکیل شده که توسط یک ایزوله کننده این دو بخش از یکدیگر جدا شده اند. ساختمان رله های حالت جامد مشابه رله های معمولی می باشد با این تفاوت که فاقد قطعه متحرک می باشد و به دلیل استفاده از عناصر نیمه هادی، سرعت قطع و وصل در این گونه مدارات بالاتر بوده و دارای حالت Low level trigger می باشد و این بدان معناست که تحریک رله با ولتاژ کم رخ می دهد. رله های حالت جامد دارای سه ترمینال ورودی برای ولتاژ مثبت، ولتاژ منفی و فرمان می باشد.
از جمله مزایای دیگر این گونه رله ها، نداشتن سر و صدا، ابعاد کوچک، مناسب بودن برای محیط های آلوده و عملیات سریع می باشد.


کاربرد رله حالت جامد SSR:

  1. کنترل اتوماسیون
  2. تجهیزات پتروشیمی

مشخصات رله الکترونیکی SSR:

  1. مدل: SSR-40 DA
  2. حالت کنترل: DC و AC
  3. ولتاژ بار: 380 ~ 24 ولت AC
  4. جریان بار: 40 آمپر
  5. ولتاژ کنترلی: 32 ~ 3 ولت DC
  6. جریان کنترلی: 25 ~ 3 میلی آمپر
  7. ولتاژ کاری: 250 ولت
  8. ولتاژ در حالت روشن: کمتر یا مساوی 1 ولت
  9. زمان خاموش-روشن شدن: کمتر از 10 میلی ثانیه
  10. جریان نشتی خاموشی: کمتر مساوی 2 میلی آمپر
  11. روش نصب: پیچ ثابت
  12. نمایش در حال کار: توسط LED

ویژگی ها رله الکترونیکی SSR:

  1. مقاومت عایقی بسیار بالا بیش از 50 مگا اهم
  2. دی الکتریک بیش از 2.5 کیلو ولت
  3. جریان فعال سازی کمتر از 7.5 میلی آمپر و ولتاژ 12 ولت DC، سازگار با CMOS IC یا TTL.
  4. قابلیت قطع شدن با روش تریگر صفر
  5. قابلیت قطع شدن در جریان بیش از 410 آمپر در یک سیکل
  6. قابلیت خنثی سازی اضافه جهش ولتاژ بوسیله مدار Snubber
  7. (Snubber Circuit عموماً در مدارهای با بار القای الکترومغناطیسی بکار گرفته می‌شود)
  8. این مدار جهت حفاظت مدارهای الکترونیکی در مقابل تغییرات ولتاژ نسبت به زمان استفاده می‌شود.

مستندات:
رله SSR-40DA SOLID STATE


Description:
A solid-state relay (SSR) is an electronic switching device that switches on or off when a small external voltage is applied across its control terminals. It can be driver by Arduino directly without any expanding circuit because of its built-in opto-couple. The plastic protective cover makes it be a safer relay module.
SSRs use a low power electrical signal to generate an optical semiconductor signal, typically with an optocoupler, that transmits and energizes the output signal. When activated, the input optical signal acts as the “switch” that allows a high voltage signal to pass through the SSR’s output component. There are several ways of doing this, but the common theme between them all is the lack of moving parts, thus making them solid-state.
SSRs can have power dissipation orders-of-magnitude larger than electromechanical relays simply because of the physics they utilize. This generally means that component designers must integrate heat sinks and fans into their designs, which does increase the overall upfront cost you incur by using the SSR.
An electromechanical relay uses a physical moving part to connect contacts within the output component of the relay. The movement of this contact is generated using electromagnetic forces from the low-power input signal, allowing the completion of the circuit that contains the high-power signal. The physical component within the electromechanical relay commonly makes a “click” sound, which can actually be useful in some situations, though it can lead to internal arcing and takes a relatively large amount of time to move.
Similar to an electromechanical relay, a small input voltage, typically 3 to 32 volts DC, can be used to control a much large output voltage or current.
It is widely used in the automation control fields such as petrochemical equipment, food machinery, packaging machinery, textile machinery, CNC machine, plastic machinery, fitness equipment, recreational facilities, especially suitable for severe environments like corrosion, moisture, dust prevention, explosive requirements, and frequent switch occasions.

Specification:
High ultra insulation resistance over 50MΩ/500V DC
High dielectric over 2.5KV
Low enable current less than 7.5mA/12V DC, compatible with CMOS IC or TTL
Low surge by zero cross trigger method
High surge current over 410A/one cycle (60Hz)
High surge voltage duration by the snubber circuit

Features:
Model: SSR-40 DA
Control Mode: DC-AC
Load Voltage: 24-380VAC
Load Current: 40A
Control Voltage: 3-32VDC
Control Current: DC 3-25mA
Working Voltage: 250V
On Voltage: ≤1V
One-off Time: ≤10ms
Off Leakage Current: ≤2mA
Installation Method: Bolt Fixed
Working Indication: LED
از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-949.html
AftabRayaneh©2022