هوالرزاق


دسته بندی
ماژول سنسور اثر هال AK09911C
ماژول سنسور اثر هال AK09911C ماژول سنسور اثر هال AK09911C ماژول سنسور اثر هال AK09911C ماژول سنسور اثر هال AK09911C

ماژول سنسور اثر هال AK09911C

کد انبار : 1968-99-3405
مدل کالا : CJMCU AK09911C
جستارش : A1-11-0504C
موجودی: 4
قیمت:
146,920 تومان

تعداد: - +
   - یا -   

ماژول سنسور سنجش مغناطیس سه محوره AK09911C

سنسور AK09911C یک سنسور اثر هال سه محوره برای اندازه گیری مغناطیس در سه محور x y و z است. این سنسور از چند بخش برای سنجش مغناطیس کمک می گیرد و از مدار درایوینگ، سنسور هال، آمپلی فایر، مدار محاسباتی و پردازش، اسیلاتور داخلی و مبدل 14 بیتی آنالوگ به دیجیتال تشکیل شده است.
ولتاژ مورد نیاز برای تغذیه این ماژول، 2.4 تا 3.6 ولت است و در محدوده میدان 1.3 گوس تا حداکثر 8 گوس را با دقت 5 میلی گوس اندازه گیری می کند.
پروتکل ارتباطی ماژول سنسور سنجش مغناطیس سه محوره AK09911C از طریق i2c می باشد.


کاربرد ماژول سنسور اثر هال AK09911C :

  1. تلفن همراه 
  2. تجهیزات قابل حمل
  3. مسیریابی

مشخصات ماژول سنسور اثر هال AK09911C :

  1. دیتای آنالوگ
  2. مگنتومتر داخلی ۱۴ بیت
  3. دیتا برای ۳ محور المنت مغناطیسی
  4. حساسیت : ۰.۶μT / LSB (typ
  5. رابط I۲C دارای مد سریع (۲.۵ MHz)
  6. پروتکل ارتباطی I2C
  7. زمان اندازه گیری: 8.5 میلی ثانیه
  8. محدوده دمای عملیاتی: -30˚C ~ +85˚C
  9. تعداد پین: 7 پین

مستندات:
دیتاشیت سنسور AK09911C


Description:
CJMCU AK09911C 3-Axis Magnetometer Compass Sensor Module [2.4V-3.6V] is a high sensitivity magnetic sensor that uses hall sensing technology to detect and measure the three geomagnetic axes. This sensor module is designed based on AK09911 3-axis Electronic Compass chip. This chip is comprised of the magnetic hall sensor, a driving circuit, signal amplifier chain, an arithmetic circuit for processing the signal from each sensor, internal oscillator for clock pulse, 14bit ADC for each axis, serial interfaces of I2C bus interface, This chip is optimized and specialized for city navigation of the cell phone and other portable appliance. This sensor is equipped with an internal magnetic source in order to test itself.
This sensor module can operate at 4 operating modes of the power cut-off, single measurement, continuous measurement, self-test and fuse ROM access. While measuring it can detect and measure with 3 different speed of a standard, fast, and high-speed mode (2.5 MHz).
This module can be supplied with 2.4V to 3.6V DC to measure both the direction and the magnitude of Earth’s magnetic fields from ±1.3 up to ±8 Gauss with ±5 milligauss accuracy that can achieve 1 to 2-degree accuracy in navigation. This compass module can communicate with microcontroller and Arduino boards trough the I2C communication protocol. 

Application:
Portable device
cell phones
navigation

Features:
Three-axis magnetometer device for Compass application
Built-in Analog-to-digital converter magnetometer data
14-bit data for every three axial magnetic components
Standard, fast and high-speed mode (2.5 MHz) compatible with Philips I2C specification version 2.1.
Chip: AK09911C
Working Voltage: +2.4V ~ +3.6V
Output Type: Digital
Sensitivity: 0.6 uT/LSB
Measurement Range: ±4912 uT
measurement Time: 8.5ms (Max)
Operating Temperatures: -30˚C ~ +85˚C
Pin Number: 7 Pin
Size: 18.54mm x 16.25mm

از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-1968.html
AftabRayaneh©2022