هوالرزاق


دسته بندی
ماژول سنسور اندازه گیری جریان 50 آمپر ACS758
ماژول سنسور اندازه گیری جریان 50 آمپر ACS758 ماژول سنسور اندازه گیری جریان 50 آمپر ACS758 ماژول سنسور اندازه گیری جریان 50 آمپر ACS758

ماژول سنسور اندازه گیری جریان 50 آمپر ACS758

کد انبار : 2227-79-3748
مدل کالا : CJMCU-758
جستارش : A1-11-0601B
موجودی: 2
قیمت:
408,840 تومان

تعداد: - +
   - یا -   

ماژول سنسور اندازه گیری جریان 50 آمپر ACS758

ماژول CJMCU-758 یک سنسور و یا اندازه گیر جریان است که با اثر هال کار می کند و می تواند تا جریان 50 آمپر را اندزه گیری و حس کند. این ماژول با اندازه گیری میزان جریان، خروجی از جنس ولتاژ دارد و به صورت خطی، با تغییر میزان جریان ولتاژ خروجی ان تغییر می کند و دارای دقت بالا و خطای کمی است. 
سنسور ACS758 دارای سه پایه برای تغذیه، زمین و دریافت خروجی است.

کاربرد سنسور جریان اثر هال ACS758:

  1. کنترل موتور
  2. تشخیص نشت جریان
  3. تشخیص خطا
  4. مدیریت توان و بار
  5. کنترل اینورتر

مشخصات سنسور جریان اثر هال ACS758:

  1. حداکثر جریان: 50 آمپر
  2. حساسیت: 40 میلی‌ولت بر آمپر
  3. محدوده ولتاژ خروجی: VCC/2 ± حساسیت × جریان
  4. ولتاژ تامین برق: 3 تا 5.5 ولت
  5. محدوده دمای عملیاتی: -40 درجه سانتیگراد تا +150 درجه سانتیگراد
  6. ولتاژ آفست: ±60 میلی‌ولت
  7. پهنای باند: DC تا 120 کیلوهرتز
  8. زمان پاسخگویی: 5 میکروثانیه
  9. ولتاژ آرام خروجی: VCC/2

مستندات:
دیتاشیت سنسور ACS758


Description:

The Allegro™ ACS758 family of current sensor ICs provides economical and precise solutions for AC or DC current sensing.
Typical applications include motor control, load detection and management, power supply and DC-to-DC converter control, inverter control, and overcurrent fault detection.
The device consists of a precision, low-offset linear Hall circuit with a copper conduction path located near the die.
Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer.
A precise, proportional output voltage is provided by the low-offset, chopper-stabilized BiCMOS Hall IC, which is programmed for accuracy at the factory.
High level immunity to current conductor dV/dt and stray electric fields, offered by Allegro proprietary integrated shield technology, provides low output voltage ripple and low offset drift in high-side, high voltage applications.
The output of the device has a positive slope (>VCC/ 2) when an increasing current flows through the primary copper conduction path (from terminal 4 to terminal 5), which is the path used for current sampling. The internal resistance of this conductive path is 100 µΩ typical, providing low power loss

Application:
motor control
load detection and management
power supply and DC-to-DC converter control
inverter control
overcurrent fault detection


Specifications:
Current: 50A
Voltage: 3.3- 5V
Operating temperature: -40 ° C ~ 150 ° C

Industry-leading noise performance through proprietary
amplifier and filter design techniques
Integrated shield greatly reduces capacitive coupling from
current conductor to die due to high dV / dt signals, and
prevents offset drift in high-side, high voltage applications
Total output error improvement through gain and offset
trim over temperature
Small package size, with easy mounting capability
Monolithic Hall IC for high reliability
Ultra-low power loss: 100 μΩ internal conductor resistance
Galvanic isolation allows use in economical, high-side
current sensing in high voltage systems
120 kHz typical bandwidth
3 μs output rise time in response to step input current
Output voltage proportional to AC or DC currents
Factory-trimmed for accuracy
Extremely stable output offset voltage
Nearly zero magnetic hysteresis

از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-2227.html
AftabRayaneh©2022