هوالرزاق


دسته بندی
ماژول مبدل SPI به UART با چیپ SC16IS752
ماژول مبدل SPI به UART با چیپ SC16IS752 ماژول مبدل SPI به UART با چیپ SC16IS752 ماژول مبدل SPI به UART با چیپ SC16IS752

ماژول مبدل SPI به UART با چیپ SC16IS752

تولید کننده: CJMCU
کد انبار : 3735-114-5934
مدل کالا : SC16IS752 SPI-UART
جستارش : A1-02-0108C
موجودی: در حال حاضر موجود نمی باشد. موجودی کالا
قیمت:
264,680 تومان

تعداد: - +
   - یا -   

ماژول مبدل I2C و SPI به سریال UART با تراشه SC16IS752

ماژول مبدل SPI به UART با چیپ SC16IS752 یک چیپ مناسب و کاربردی جهت تبدیل پروتکل های SPI و I2C به UART است و به کمک آن می توان سیستم هایی که به صورت وای فای و از طریق پورت UART تبادل داده انجام می دهند را از طریق اینترفیس SPI کنترل کرد و پروتکل ارتباطی آن ها را جهت ارتباط با بحش دیگر میکروکنترلر آزاد کرد.
ولتاژ تغذیه این ماژول از طریق رگولاتور 3.3 ولت ثبیت و با یکم اختلاف به آی سی می رسد و با اتصال ولتاژ حداکثر 5.5 ولت اتفاقی برای برد نمی افتد.


کاربرد آداپتور تبدیل I2C به UART با تراشه SC16IS752:

  1. اینترنت اشیا
  2. بردهای ریموت و وایرلس
  3. پروژه های آردوینو

مشخصات آداپتور تبدیل I2C به UART با تراشه SC16IS752: 

  1. UART به صورت Dual-Duplex
  2. اینترفیس SPI و I2C
  3. ولتاژ تغذیه 3.3 ولت
  4. سازگار با استاندارد صنعتی 16C450
  5. محدوده دمای عملیاتی: -40°C تا +95°C
  6. نرخ انتقال داده 5 Mbit/s
  7. قابلیت ارتباط با مود کاری RTS/cds
  8. 8 پین ورودی و خروجی دیجیتال
  9. فرستنده و گیرنده 64 بایتی FIFO 

مستندات:
راه اندازی ماژول SC16IS752 SPI-UART
دیتاشیت ماژول SC16IS752 SPI-UART


Description:
The SC16IS752 is an I2C/SPI bus interface that connects to a dual-channel, high-performance UART, providing data rates of up to 5 Mbit/s, low operating and standby currents, and eight pin e additional programmable /s for the application. Transparent protocol conversion from I2C/SPI bus to RS-232/RS-485, and fully bi-directional. The SC16IS752 only supports SPI clock speeds of 4 Mbit/s and it supports IrDA SIR up to 1.152 Mbit/s. The internal register assembly is backward compatible with the widely used and popular 16C450. Supports hardware and software automatic flow control, automatic RS-485 support and software reset. Allows the software to reset the uart at any time.

Application:

IOT
WiFily Projects
Arduino board projects

Features:
Dual-Duplex UART
I2C bus or SPI interface optional
3.3V or 2.5V operation
Industrial temperature range: -40°C to +95°C
Fully compatible with industry standard 16C450 and its equivalent
Baud rate up to 5 Mbit/s in 16 × clock mode
Automatic hardware flow control using RTS/cds
Support RS-485 automatic (slave address automatic detection)
Up to eight programmable I/O pins
RS-485 pilot direction control via RTS signal
RS-485 driver direction command reversal
SC16IS762 supports IrDA SIR up to 1.152 kbit/s
Software reset
Activate/deactivate transmitters and receivers independently of each other
Programmable special character detection, fully programmable character format
5-bit, 6-bit, 7-bit or 8-bit characters, even, odd or no parity, 1, 11/2 or 2 stop bits
Production and line stop detection
Internal loopback mode
Standby current less than 3.3° at 3.3V
5V input tolerance
Integrated IrDA encoder and decoder supporting IrDA SIR up to 115.2 kbit/s
Automatic software flow control with programmable Xon/Xoff characters, single or two Xon/Xoff characters
64 byte FIFO (transmitter and receiver), receive and transmit FIFO levels
SPI Bus Function:
SC16IS752 supports SPI clock speeds up to 4 Mbit/s
Slave mode only
SPI mode 0
Small panel size: 27.2mm*26.4mm*15.5mm
I2C Bus Function:
Noise filter on SCL/SDA input
400 kbps (fastest)
Compatible with I2C bus fast mode
Only slave mode
از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-3735.html
AftabRayaneh©2022