هوالرزاق


دسته بندی
ماژول رگولاتور DC به DC افزاینده MT3608 دارای ورودی میکرو USB و قابلیت تنظیم ولتاژ خروجی
ماژول رگولاتور DC به DC افزاینده MT3608 دارای ورودی میکرو USB و قابلیت تنظیم ولتاژ خروجی ماژول رگولاتور DC به DC افزاینده MT3608 دارای ورودی میکرو USB و قابلیت تنظیم ولتاژ خروجی ماژول رگولاتور DC به DC افزاینده MT3608 دارای ورودی میکرو USB و قابلیت تنظیم ولتاژ خروجی ماژول رگولاتور DC به DC افزاینده MT3608 دارای ورودی میکرو USB و قابلیت تنظیم ولتاژ خروجی ماژول رگولاتور DC به DC افزاینده MT3608 دارای ورودی میکرو USB و قابلیت تنظیم ولتاژ خروجی ماژول رگولاتور DC به DC افزاینده MT3608 دارای ورودی میکرو USB و قابلیت تنظیم ولتاژ خروجی

ماژول رگولاتور DC به DC افزاینده MT3608 دارای ورودی میکرو USB و قابلیت تنظیم ولتاژ خروجی

کد انبار : 2401-136-3995
مدل کالا : MT3608 step up
جستارش : B1-05-0402A
موجودی: 200
قیمت:
20,120 تومان

تعداد: - +
   - یا -   

ماژول رگولاتور DC به DC افزاینده MT3608 دارای ورودی میکرو USB و قابلیت تنظیم ولتاژ خروجی

مبدل DC به DC یا DC to DC Converter نوعی مبدل الکترونیکی است که جریان DC را از یک منبع دریافت می کند، سپس آن جریان را به صورتی دیگر با سطح ولتاژ بالاتر یعنی مبدل افزاینده و یا سطح ولتاژ پایین تر یعنی مبدل کاهنده تغییر می دهد. این مبدل ها در منبع تغذیه سوئیچینگ، ماژول ها و بردهای Embedded و پروژه های الکترونیک و رباتیک برای قسمتی از مدار که به ولتاژ و جریان خاصی نیاز است به کار می رود. مبدل DC به DC علاوه بر افزایش یا کاهش جریان، تثبیت جریان و ولتاژ را هم انجام می دهد.
تراشه به کار رفته در این مبدل MT3608 می باشد که یک چیپ مبدل 6 پایه با فرکانس ثابت است و برای توان های پایین مورد استفاده قرار می گیرد. این ماژول افزاینده MT3608 دارای پورت میکرو USB می باشد و برای شارژ موبایل با سطح ولتاژ های 9، 12، 15، 18 و 24 ولت قابل استفاده می باشد. تغییر ولتاژ با استفاده از پتانسیومتر صورت می گیرد و در صورتی که ولتاژ خروجی تنظیم نگردد، ولتاژ خروجی برابر ولتاژ ورودی می باشد.


کاربرد رگولاتور MT3608:

  1. تجهیزات باتری
  2. ست تاپ باکس
  3. تامین بایاس ال سی دی
  4. DSL و کابل
  5. مودم ها و روترها
  6. کارت های شبکه که از اسلات های PCI یا PCI Express تغذیه می شوند

مشخصات ماژول افزاینده MT3608:

  1. ماکزیمم جریان خروجی: 2 آمپر
  2. ولتاژ ورودی: 4 ~ 2 ولت
  3. حداکثر ولتاژ خروجی: بیش از 28 ولت (پیشنهاد می گردد تا 26 ولت استفاده شود)
  4. بازدهی: بیش از 93 درصد
  5. دقت رگولاسیون خروجی : 0.5 درصد
  6. فرکانس سوییچینگ: 1.2 مگاهرتز
  7. ریپل خروجی: کمتر از 100 میلی ولت
  8. دمای کاری: 85+ ~ 45- درجه سانتی گراد
  9. اندازه: 14 * 17 * 30 میلی متر

Description:
The MT3608 is a constant frequency, 6-pin S0T23 current mode step-up converter intended for small, low power applications.
The MT3608 switches at 1.2MHz and allows the use of tiny, low-cost capacitors and inductors 2mm or less in height. Internal soft-start results in small inrush current and extends battery life. The MT3608 features automatic shifting to pulse frequency modulation mode at light loads.
The MT3608 includes under-voltage lockout, current limiting, and thermal overload protection to prevent damage in the event of an output overload. The MT3608 is available in a small 6-pin SOT-23 package.
The MT3608 uses a fixed frequency, peak current mode boost regulator architecture to regulate the voltage at the feedback pin. The operation of the MT3608 can be understood by referring to the block diagram of Figure 2.
At the start of each oscillator cycle, the MOSFET is turned on through the control circuitry. To prevent sub-harmonic oscillations at duty cycles greater than 50 percent, a stabilizing ramp is added to the output of the current sense amplifier and the result is fed into the negative input of the PWM comparator.
When this voltage equals The output voltage of the error amplifier the power MOSFET is turned off.
The voltage at the output of the error amplifier is an amplified version of the difference between the 0.6V bandgap reference voltage and the feedback voltage. In this way, the peak current level keeps the output in regulation.
If the feedback voltage starts to drop, the output of the error amplifier increases.
These results in more current to flow through the power MOSFET, thus increasing the power delivered to the output.
The MT3608 has an internal soft-start to limit the amount of input current at startup and to also limit the amount of overshoot on the output.

Module Features:
1) Maximum Output Current: 2A (recommended in 1A)
2) Input Voltage: 2V ~ 24V
3) Maximum Output Voltage: > 28V (recommended to use within 26V )
4) Efficiency:> 93% (efficiency of input and output pressure related)
5) Size: 30mm * 17 mm * 14 mm (length * width * height)
6) Load Regulation: 0.5%
7) Frequency Switching: 1.2 MHz
8) Output Ripple: < 100mv
9) Working Temperature: -45 ~ +85 C

Application:
Battery-Powered Equipment
Set-Top Boxed
LCD Bias Supply
DSL and Cable
Modems and Routers
Networking cards powered from PCI or PCI Express slots
از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-2401.html
AftabRayaneh©2022