هوالرزاق


دسته بندی
ماژول رگولاتور DC به DC افزاینده 6 آمپر
ماژول رگولاتور DC به DC افزاینده 6 آمپر ماژول رگولاتور DC به DC افزاینده 6 آمپر ماژول رگولاتور DC به DC افزاینده 6 آمپر

ماژول رگولاتور DC به DC افزاینده 6 آمپر

کد انبار : 1066-136-2249
مدل کالا : C6A1
جستارش : B2-06-0401A
موجودی: 85
قیمت:
125,120 تومان

تعداد: - +
   - یا -   

ماژول رگولاتور DC به DC افزاینده 6 آمپر با قابلیت تنظیم ولتاژ خروجی

ماژول رگولاتور قطعه ای است که از آن برای تغییر ولتاژ ورودی و نگهداشتن خروجی در حالت ثابت استفاده می شود.رگولاتور افزاینده ولتاژ DC-DC را مدار BOOST نیز می نامند که می تواند به دو صورت افزاینده و کاهنده باشد.
ماژول رگولاتور DC به DC افزاینده 6 آمپر  یک مدار افزاینده ولتاژ است که ولتاژ DC دریافت شده در محدوده ی 10 تا 32 ولت را تغییر می دهد. خروجی آن در بواسطه تغییر پتانسیومتر، محدوده ای میان 12 تا 35 ولت خواهد بود. جریان ورودی به این رگولاتور متغیر برابر با 10 آمپر بوده و جریان خروجی آن 6 آمپر خواهد بود. توان خروجی این قطعه حداکثر تا 150 وات می باشد.

کاربرد رگولاتور افزایش ولتاژ 6A:

  1. افزایش ولتاژ
  2. ساخت منبع تغذیه

مشخصات رگولاتور افزایش ولتاژ 6A:

  1. ماژول افزاینده ایزوله نشده
  2. حالت ورودی: IN+ ورودی مثبت، IN- ورودی منفی
  3. ولتاژ ورودی: 32 ~ 12 ولت
  4. ولتاژ خروجی: 35 ~ 12 ولت
  5. جریان خروجی: 6 آمپر حداکثر
  6. جریان ورودی: 10 آمپر حداکثر
  7. توان خروجی: به صورت هوا خنک 100 وات، با فن حداکثر 150 وات
  8. بازدهی تبدیل: 94 درصد
  9. دمای کاری: 85+ ~ 40- درجه سانتی گراد
  10. افزایش دما و خروجی حداکثری: 45 درجه سانتی گراد
  11. جریان بی باری: 25 میلی آمپر
  12. بدون حفاظت در برابر اتصال کوتاه(توصیه می شود از محافظ جریان زیاد در ورودی ماژول استفاده شود)
  13. ابعاد: 56.5 × 23 × 65 میلی متر


مستندات:
ماژول افزاینده ولتاژ C6A1


Description:
A boost converter (step-up converter) is a DC-to-DC power converter that steps up voltage and current from its input to its output .The basic DC-DC converter will take the current and pass it through a "switching element". This turns the signal into a square wave, which is actually AC. The wave then passes through another filter, which turns it back into a DC signal of the appropriate voltage necessary.
In addition to its own load capacity, it is also affected by various factors such as the front-end power supply and the rear-end load.
Power for the boost converter can come from any suitable DC source, such as batteries, solar panels, rectifiers, and DC generators. A process that changes one DC voltage to a different DC voltage is called DC to DC conversion. A boost converter is a DC to DC converter with an output voltage and current greater than the source voltage.


Features:

Name: Non-isolated boost module
Input Mode: IN+ input positive, IN- input negative
Input Voltage: 12~32V
Output Voltage: 12~35V (continuously adjustable)
Output Current: 6A (MAX)
Input Current: 10 (MAX) (more than 10A, please strengthen the heat,)
Output Power: Natural cooling 100W (MAX), plus fan 150(MAX)
Conversion Efficiency: 94% (measured when inputting 16V output 19V 2.5A) (for reference only)
Operating Temperature: Industrial grade (-40°C to +85°C) (ambient temperature exceeds 40 degrees, please reduce power usage, or add a fan)
Full-load Temperature rise: 45 °C
No-load Current: typical 25mA
Short Circuit Protection: None (please install overcurrent protector at input)
Input Reverse Connection Protection: None, input series diode
Size: 65mm x 23mm x 56.5mm (including heat sink)

از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-1066.html
AftabRayaneh©2022