هوالرزاق


دسته بندی
ماژول پاور سوئیچینگ دارای خروجی 12 ولت 2 آمپر
ماژول پاور سوئیچینگ دارای خروجی 12 ولت 2 آمپر ماژول پاور سوئیچینگ دارای خروجی 12 ولت 2 آمپر ماژول پاور سوئیچینگ دارای خروجی 12 ولت 2 آمپر ماژول پاور سوئیچینگ دارای خروجی 12 ولت 2 آمپر

ماژول پاور سوئیچینگ دارای خروجی 12 ولت 2 آمپر

کد انبار : 4089-135-6447
مدل کالا : PSML-12V3A
جستارش : A2-05-0604A
موجودی: 52
قیمت:
71,170 تومان

تعداد: - +
   - یا -   

ماژول پاور سوئیچینگ دارای خروجی 12 ولت 2 آمپر

هر سیستم یا مدار الکترونیکی نیاز به یک منبع تغذیه ای دارد که دارای خصوصیاتی مانند راندمان بالا، توان اتلافی پایین، سطح ولتاژ یا جریان کنترل شده و دقیق و ابعاد فیزیکی پایین و …می باشد. خصوصیاتی که ترانس های سیم پیچ دار سنتی فاقد آن هستند. راه حل استفاده از منابع تغذیه سوییچینگ ( Switch Mode Power Supply: SMPS ) است. در این نوع منابع تغذیه تغییر توان الکتریکی از طریق تغییر سطح ولتاژ و یا تبدیل AC به DC ،DC به DC ,DC به AC و یا AC به AC میسر می شود.
پاور سوییچینگ ها توانایی تحمل بار زیاد را دارند و نویز بسیار کمی را ایجاد می کنند. در مقابل، منبع تغذیه خطی ولتاژ خروجی را با اتلاف مداوم برق در ترانزیستور pass رگوله می کند. این راندمان تبدیل توان بالاتر مزیت مهمی از منبع تغذیه switched-mode است. به دلیل کوچکتر بودن اندازه و وزن ترانسفورماتور، منبع تغذیه Switched-mode نیز ممکن است از منبع تغذیه خطی به طور قابل ملاحظه ای کوچکتر و سبک تر باشد. بسیاری از توپولوژی های متداول مانند lyback, push-pull, half-bridge and full-bridge, متشکل از ترانسفورماتوری است برای تامین ایزولاسیون، مقیاس بندی ولتاژ خروجی multiple است. تنظیمات غیر ایزوله دارای ترانسفورماتور نیستند و با انتقال انرژی القایی تبدیل نیرو فراهم می شود. در سیستم های صوتی، آمپلی فایر، تجهیزات روشنایی، انواع ال ای دی، سیستم های امنیتی، دوربین های مدار بسته، اتوماسیون، سیستم های کنترل، پی ال سی ها از منبع تغذیه 12 ولت 2 آمپر استفاده می گردد.
بدنه فلزی این گونه از منابع تغذیه در حکم یک گرمابَر ( هیت سینک ) عمل می‌کند.

کاربرد:
کامپیوتر شخصی
شارژر موبایل
سیستم های امنیتی
سیستم های حمل و نقل ریلی
نورپردازی

مشخصات:
مجهز به حفاظت در برابر اتصال کوتاه، ولتاژ و جریان بالا
ولتاژ ورودی و محدوده فرکانس: 85 ~ 264 ولت AC با فرکانس 47 ~ 63Hz
مقاومت دی الکتریک: AC1500V, 1min ورودی و خروجی
محافظت اتصال کوتاه: recovery
جریان هجومی: 20 آمپر در 120 ولت AC استارت سرد
دمای کاری: 10 ℃ ~ 50 ℃ سانتی گراد
محدوده قابل تنظیم خروجی: ± 10%
ولتاژ و جریان خروجی: 12 ولت 2 آمپر

 

Description:
A switched-mode power supply SMPS or switcher is an electronic power supply that incorporates a switching regulator to convert electrical power efficiently. Like other power supplies, an SMPS transfers power from a DC or AC source (often mains power) to DC loads, such as a personal computer, while converting voltage and current characteristics. Unlike a linear power supply, the pass transistor of a switching-mode supply continually switches between low-dissipation, full-on and full-off states, and spends very little time in the high dissipation transitions, which minimizes wasted energy. A hypothetical ideal switched-mode power supply dissipates no power. Voltage regulation is achieved by varying the ratio of on-to-off time (also known as duty cycles). In contrast, a linear power supply regulates the output voltage by continually dissipating power in the pass transistor. This higher power conversion efficiency is an important advantage of a switched-mode power supply. Switched-mode power supplies may also be substantially smaller and lighter than a linear supply due to the smaller transformer size and weight.
A basic isolated AC to DC switched-mode power supply consists of: Input rectifier and filter, Inverter consisting of switching devices such as MOSFETs, Transformer, Output rectifier, filter, and Feedback and control circuit.
There are different circuit configurations known as topologies, each having unique characteristics, advantages, and modes of operation, which determines how the input power is transferred to the output.
Most of the commonly used topologies such as flyback, push-pull, half-bridge and full-bridge, consist of a transformer to provide isolation, voltage scaling, and multiple output voltages. The non-isolated configurations do not have a transformer and the power conversion is provided by the inductive energy transfer.

Features:
Protection Short circuit / Overload / Over voltage
Input Voltage & Frequency Range: 85 ~ 264V AC/ 47 ~ 63Hz
Inrush Current: 20A @ 120V AC ( cold start )
Output adjustment range: ± 10% ( rated output voltage )
Overload: 105% to 200% ( rated load )
Overvoltage: 115% ~ 135% ( rated output voltage )
Short circuit protection: recovery
Output start time: ≤ 2S @ 120VAC ≤ 1.0S @ 230VAC
Output hold time: ≥ 10mS @ 120VAC, ≥ 20mS @ 230VAC
Dielectric strength: (Input - Output)  AC1500V, 1min
Input - Chassis: AC1500V, 1min
Output - Chassis: DC500V, 1min
Work environment: 10 ℃ ~ 50 ℃; 20% ~ 90% RH ( non-condensing )

Application:
Personal computers
Mobile Charger
Machine tool industries
Security system
Railway system
Lighting 

از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-4089.html
AftabRayaneh©2022