هوالرزاق


دسته بندی
ماژول ساعت فوق دقیق DS3231 با رابط I2C
ماژول ساعت فوق دقیق DS3231 با رابط I2C ماژول ساعت فوق دقیق DS3231 با رابط I2C ماژول ساعت فوق دقیق DS3231 با رابط I2C

ماژول ساعت فوق دقیق DS3231 با رابط I2C

کد انبار : 724-144-1766
مدل کالا : RTC DS3231
جستارش : A1-12-0509A
موجودی: در حال حاضر موجود نمی باشد. موجودی کالا
قیمت:
70,570 تومان

تعداد: - +
   - یا -   

ماژول ساعت فوق دقیق DS3231 با رابط I2C

***این کالا فاقد باتری سکه ای می باشد.

آی سی DS3231 تکمیل شده و پیشرفته ترDS1307 بوده که علاوه بر امکاناتDS1307 از دقت بالاتر، در نظرگرفتن پین ریست و نیز قابل برنامه ریزی 2زمان مختلف به منظور تنظیم آلارم است. ولتاژ کاری ماژول ساعت فوق دقیق DS3231 3.3 بوده و از باتری بک آپ و جریان مصرفی بسیار پایین استفاده می کند. در واقع ماژول ساعت فوق دقیق DS3231 ساعت زمان واقعی real time clock(RTC)  بوده که از پروتکل سریالI2C  پشتیبانی می کند. کارکرد ماژول ساعت فوق دقیق DS3231 براساس کدهای  binary coded decimalکه اصطلاحا کدBCD  نامیده می شود، است.
باتری بک آپ قرار گرفته بر روی ماژول ساعت فوق دقیق DS3231 زمانیکه برق در دسترس نیست باعث جلوگیری از عقب افتادن زمان خواهد شد. منبع کلاک این آی سی از یک کریستال ساعت به فرکانس 32.768KHZاستفاده می کند. این آی سی قابل کارکرد در دو حالت24ساعته و12ساعته AM/PM را دارد همچنین علاوه بر ساعت بصورت ثانیه، دقیقه، ساعت امکان ذخیره تاریخ بصورت روز، هفته، ماه، سال را نیز دارد. در ضمن اطلاعات نوشته شده بر روی این آی سی تا سال2100 برنامه ریزی شده است.

کاربرد ماژول ساعت DS3231 با رابط I2C:

  1. آموزشی
  2. صنعتی
  3. عمومی

مشخصات ماژول ساعت DS3231 با رابط I2C:

  1. ولتاژ کاری: 5.5 ~ 3.3 ولت
  2. چیپ ساعت: DS3231
  3. دقت ساعت: محدوده 0 تا 40 درجه سانتی گراد، با دقت 2ppm و میزان خطای یک دقیقه ای
  4. دارای 2 ساعت هشدار
  5. قابلیت محاسبه دقیقه، ثانیه، ساعت، شمارش روز، ماه، سال و تاریخ و قابلیت جبران سال کبیسه
  6. چیپ سنسور دما با دقت اندازه گیری 3 درجه
  7. حافظه چیپ: AT24C32 با ظرفیت 2 کیلوبیت
  8. دارای درگاه ارتباطی I2C با سرعت حداکثری 400 کیلوهرتز در ولتاژ کاری 5 ولت
  9. قابلیت به شکل متوالی(زنجیره ای) قرار گرفتن با سایر درگاه های I2C
  10. ابعاد: 14 * 22 * 38 میلی متر
  11. دستوالعمل سیم کشی (به عنوان مثال برای Arduino UNO R3):
    SCL → A5
    SDA → A4
    VCC → 5V
    GND → GND

مستندات:
کتابخانه و دیتاشیت RTC DS3231


Description:
This is a low-cost, extremely accurate I2C real-time clock (RTC), with an integrated temperature-compensated crystal oscillator (TCXO) and crystal.
The device incorporates a battery input, disconnect the main power supply and maintains accurate timekeeping.
An integrated oscillator improves the long-term accuracy of the device and reduces the number of components of the production line.
DS3231 available in commercial and industrial temperature ranges, using a 16-pin 300mil SO package.
RTC maintains seconds, minutes, hours, day, date, month, and year information. Less than 31 days of the month, the end date will be automatically adjusted, including corrections for the leap year.
The clock operates in either the 24 hours or band/AM/PM indication of the 12-hour format. It provides two configurable alarm clocks and a calendar can be set to a square wave output.
Addresses and data are transferred serially through an I2C bidirectional bus.
A precision temperature-compensated voltage reference and comparator circuit monitors the status of VCC to detect power failures, provide a reset output, and if necessary, automatically switch to the backup power supply.
RST pin is monitored as generating μP reset manually.
Save time and high precision addition, DS3231 also has some other features that extend the system host of additional features and a range of options.
The device integrates a very precise digital temperature sensor, through the I2C * interface to access it (at the same time).
The temperature sensor accuracy is ±3 °C. The on-chip power supply control circuit can automatically detect and manage the main and standby power (i.e., low-voltage battery) to switch between the power supplies.
If the main power failure, the device can continue to provide accurate timing and temperature, performance is not affected.
When the main power re-power or voltage value returns to within the allowable range, the on-chip reset function can be used to restart the system microprocessor.

Module Parameters:
Operating Voltage: 3.3 ~ 5.5 V
Clock Chip: High-precision clock chip DS3231
Clock Accuracy: 0-40 ℃ range, the accuracy 2ppm, the error was about 1 minute
Memory Chips: AT24C32 (storage capacity 32K)
Chip Temperature Sensor Accuracy: ± 3 ℃
Size: 38mm (length) * 22mm (W) * 14mm (height)
With two calendar alarm clocks
Programmable square-wave output
Real-Time clock generator seconds, minutes, hours, day, date, month and year timing and provide valid until the year 2100 leap year compensation.
I2C bus interface, the maximum transmission speed of 400KHz (working voltage of 5V)
Can be cascaded with other I2C devices.
Wiring Instructions (with Arduino UNO R3 for example):
SCL → A5
SDA → A4
VCC → 5V
GND → GND
از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-724.html
AftabRayaneh©2022