هوالرزاق


دسته بندی
سنسور مجاورتی مادون قرمز E18-D80NK
سنسور مجاورتی مادون قرمز E18-D80NK سنسور مجاورتی مادون قرمز E18-D80NK سنسور مجاورتی مادون قرمز E18-D80NK سنسور مجاورتی مادون قرمز E18-D80NK

سنسور مجاورتی مادون قرمز E18-D80NK

کد انبار : 128-82-1079
مدل کالا : E18-D80NK
جستارش : B2-18-0404A
موجودی: 141
قیمت:
111,900 تومان

تعداد: - +
   - یا -   

سنسور مجاورتی مادون قرمز E18-D80NK مناسب برای تشخیص فاصله و مانع

سنسور مادون قرمز E18-D80NK یک سنسور فاصله سنج و تشخیص مانع می باشد و می تواند فاصله 3 تا 80 سانتی متری را تشخیص دهد. راه اندازی این ماژول بسیار ساده و کاربردی می باشد.
ویژگی این سنسور استفاده از سیگنال مادون قرمز مدوله شده می باشد که مانع از تداخل نور لامپ یا نور خورشید می شود.
این سنسور قابلیت تغییر دارد، می توان از پیچ تنظیم برای تنظیم محدوده سنجش استفاده کرد و در صورت تشخیص وجود جسم یا مانع، خروجی دیجیتال سنسور فعال می شود. این سنسور سنجش مسافت را به صورت غیر تماسی انجام می دهد.


کاربردها حسگر مجاورتی:

  1. برای تشخیص و شمارش وسیله(مات یا شفاف)
  2. تشخیص مانع با ماشین ربات
  3. به عنوان یک سوییچ نوری

مشخصات سنسور E18-D80NK:

  1. جریان DC خروجی رله یا SCR یا خروجی رله کنترلی: 100 میلی آمپر با منبع تغذیه 5 ولت
  2. جریان مصرفی DC: کمتر از 25 میلی آمپر
  3. زمان جواب دهی: کمتر از 2 میلی ثانیه
  4. زاویه دید: کمتر مساوی با 15 درجه
  5. فاصله قابل تنظیم: 80 ~ 3 سانتی متر
  6. اجسام قابل تشخیص: وسایل با بدنه مات یا شفاف
  7. دمای محیط کاری: 85+ ~ 25- درجه سانتی گراد
  8. استاندارد تشخیص اشیا: از 3000 لوکس نور روشنایی تا 10000 لوکس نور خورشید
  9. جنس جعبه: پلاستیک

پایه های  E18-D80NK :

  1. قهوه ای: منبع تغذیه
  2. آبی: زمین
  3. مشکی: سیگنال

مستندات:
عملکرد سنسور E18-D80NK


Description:
The infrared proximity switch module is a reflection-type photoelectric sensor that integrates transmitting and receiving infrared beams function.
The sensor can detect very long distance free from the interruption of visible light. Owing to the advantages of the price, assembly, and operation, it is widely applied in so much automatic work, like obstacle avoidance of a robot and piecework on the assembly line.
Infrared proximity switches work by sending out beams of invisible infrared light.
A photodetector on the proximity switch detects any reflections of this light.
These reflections allow infrared proximity switches to determine whether there is an object nearby.
The output pin is pulled up to the power pin due to the internal pull high of the sensor.
Hence, the module will output a HIGH if no object is detected and a LOW if an object is detected.
Note:
* If there is no change in the output of proximity sensor, try to move the object closer.
* Adjust the screw in the proximity sensor to change the range of detection.

Features:
The output current DC / SCR / Relay Control output: 100mA / 5V power supply
The current consumption of the DC <25mA
Response time <2ms
Point angle: ≤15 °, effective distance 3-80CM adjustable
Detect objects: a transparent or opaque body
The working environment temperature: -25 deg. C ~ + 55 deg. C
The standard sensing object: sunlight 10000LX less incandescent 3000LX the following
Case Material: Plastic

Applications:
To detect or count object (transparent or opaque).
By robot, car to detect an obstacle and then avoid it.
As a photoelectric switch.

Pins:
Brown: VCC
Blue: GND
Black: Signal
از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-128.html
AftabRayaneh©2022