هوالرزاق


دسته بندی
ماژول +NRF24L01 - برد SMD
ماژول +NRF24L01 - برد SMD ماژول +NRF24L01 - برد SMD ماژول +NRF24L01 - برد SMD ماژول +NRF24L01 - برد SMD

ماژول +NRF24L01 - برد SMD

کد انبار : 901-119-2026
مدل کالا : NRF24L01P-SMD
جستارش : A1-02-0809A
موجودی: 68
قیمت:
39,990 تومان

تعداد: - +
   - یا -   

ماژول +NRF24L01 - برد SMD

ماژول NRF24L01 SMD یک ماژول قدرتمند و کارآمد برای ارسال و دریافت اطلاعات به صورت بی سیم می باشد.
چیپ NRF24L01 نمونه تصحیح شده با امکانات بیشتر و نرخ داده بالاتر چیپ NRF2401 است که توسط شرکت NORDIC در اوایل سال 2008 معرفی شد.
ماژول‌های فرستنده گیرنده بر پایه NRF24 قابلیت‌های بسیاری دارند، از جمله رنج فرکانس کاری 2.4 گیگاهرتز و 6 کانال فرستنده گیرنده در کنار مصرف انرژی ناچیز، انتخاب اقتصادی برای بسیاری از پروژه‌ها می‌باشند. این چیپ یک ماژول بسیار عالی برای ارسال و دریافت اطلاعات بدون خطا است.
مدولاسیون ارتباطی این ماژول به صورت GFSK است , همان مدولاسیونی که در تکنولوژی BLUETOOTH استفاده شده و به صورت انحصاری در دست چند شرکت بزرگ مثل BLUETOOTH و NORDIC SEMICONDUCTOR و TEXAS INSTRUMENT و چند شرکت دیگر قرار دارد.
این چیپ به صورت دو طرفه کار می کند و در کل شما فقط به 2 عدد از این چیپ ها برای ارتباط لازم دارید.
نرخ داده این چیپ حداکثر 2 مگابیت بر ثانیه است که می توان از آن برای انتقال اطلاعات سنگینی مشابه صوت و یا حتی ویدئو استفاده کرد.


Description:
NRF24L01 is a monolithic transceiver chip working in the 2.4-2.5GHz worldwide ISM band. The wireless transceiver includes: frequency generator enhanced SchockBurstTM mode controller power amplifier crystal amplifier modulator-demodulator output power channel selection and protocol. The setting can be set through the SPI interface. The extremely low current consumption, when working in the transmission mode, the transmission power is 6dBm, the current consumption is 9.0mA, the acceptance mode is 12.3mA, the power consumption mode and the standby mode are lower. This module has Six channels supporting data reception.

Features:
1. Low Operating Voltage: 1.9 ~ 3.6V low voltage operation
2. The high rate: 2Mbps, because the air transport time is very short, greatly reduced the wireless transmission of the collision phenomenon. (software settings 1Mbps or 2Mbps air transmission rate)
3. Multi-frequency: 125 frequencies, multi-point communication and frequency hopping to meet the communication needs.
The ultra-small: Built 2.4GHz antenna, compact, 15x 29 mm (including antenna)
4. Low power consumption: When operating in answer mode communication, fast air transport and start-up time, which greatly reduces the current consumption.
5. Low application costs: NRF24L01 integrates all RF protocols related to the high-speed signal processing section, such as automatic retransmission of lost data packets and automatically generates response signals, NRF24L01 of SPI interfaces can use microcontroller hardware SPI mouth connection or with MCU I / O port for simulation, internal FIF O can be used with a variety of high and low-speed microprocessor interface, easy to use a low-cost microcontroller.
6. Facilitate the development: Since the link layer is fully integrated into the module is very easy to develop.
Automatic retransmission function, automatic detection, and retransmission of lost packets. Retransmission time and the number of retransmissions can be automatic software-controlled storage not received response signal packets automatic answer function.
After receiving valid data, the module automatically sends a response signal, without further programming Carrier Detect - Fixed frequency detection built-in hardware CRC error detection and multipoint communication address control packet transmission error counter and carrier detection.
The functions can be used to set the frequency hopping can be set at the same time six-way receive channel address.
Selective open receiving channel standard pin Dip 2.54MM pitch interfaces for embedded applications.

از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-901.html
AftabRayaneh©2022