هوالرزاق


دسته بندی
ماژول صفحه نمایش LED ماتریسی 8X8 تک رنگ دارای چیپ درایور MAX7219
ماژول صفحه نمایش LED ماتریسی 8X8 تک رنگ دارای چیپ درایور MAX7219 ماژول صفحه نمایش LED ماتریسی 8X8 تک رنگ دارای چیپ درایور MAX7219 ماژول صفحه نمایش LED ماتریسی 8X8 تک رنگ دارای چیپ درایور MAX7219 ماژول صفحه نمایش LED ماتریسی 8X8 تک رنگ دارای چیپ درایور MAX7219 ماژول صفحه نمایش LED ماتریسی 8X8 تک رنگ دارای چیپ درایور MAX7219

ماژول صفحه نمایش LED ماتریسی 8X8 تک رنگ دارای چیپ درایور MAX7219

کد انبار : 120-72-1068
مدل کالا : MAX7219
جستارش : A2-16-0809A
موجودی: در حال حاضر موجود نمی باشد. موجودی کالا
قیمت:
57,380 تومان

تعداد: - +
   - یا -   

ماژول صفحه نمایش LED ماتریسی 8X8 تک رنگ دارای چیپ درایور MAX7219

صفحه نمایش های LED یا Light-Emitting Diodes مدت زمانی است که وارد بازار شده اند که نسبت به صفحه نمایش های LCD از کیفیت رنگ بهتر، روشنایی بیشتر و همچنین مصرف کمترباتری برخوردارند. این ماژول نمایشگر led یک ماتریس 8 در 8 از LED ها می باشد که جهت نمایش یک کاراکتر عددی یا الفبایی بسیار مناسب است. درگاه ارتباطی این صفحه نمایش از نوع SPI می باشد که کاربری بسیار آسانی دارد و ارسال داده از طریق 3 پایه صورت می گیرد و قادر است در بازه دمایی 0 تا 50 درجه کار کند.این ماژول نمایشگر تک رنگ می باشد و  راه اندازی این ماژول LED ماتریسی با استفاده از چیپ درایورMAX7219 صورت می گیرد که یک آی سی 8 بیتی است و برای روشن شدن نیاز به ولتاژ 4 تا 5.5 ولت را دارد.


کاربرد ماژول صفحه نمایش LED ماتریسی :

  1. ساخت انواع پنل های نمایشی الکترونیکی

مشخصات صفحه نمایش LED ماتریسی 8X8 تک رنگ دارای چیپ درایور MAX7219 :

  1. ولتاژ عملیاتی: 4.7 تا 5.3 ولت DC
  2. ولتاژ معمول: 5 ولت
  3. جریان عملیاتی: 320 میلی آمپر
  4. حداکثر جریان عملیاتی: 2 آمپر
  5. دمای عملیاتی: 0 تا 50 درجه سانتی گراد

مستندات:
دانلود نمونه کد آردوینو و مشاهده سیم بندی نمایشگر ماتریسی 8X8


Description:
8×8 matrix consists of 64 dots or pixels. There is a LED for each pixel and these LEDs are connected to a total of 16 pins. Generally, there are two types of dot matrix – a common cathode and common anode. They look almost the same in appearance.
This module is based on the MAX7219 chip which is a compact, serial input common-cathode driver that interfaces microcontrollers (µPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs. All common microcontrollers can be connected to this module by using a 4-wire serial interface. Each output can be addressed without refreshing the entire display. This module requires only 3 I/O lines for driving the display, making it ideal for your microcontroller projects. It Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8x8 static RAM that stores each digit. Only one external resistor is required to set the segment current for all LEDs.

Application:
IoT
Smart Home
Remote Monitoring
etc.

Features:
1. The Single Module Can Drive a 8 * 8 Common Cathode Lattice
2. Module Voltage: 5V
3. Module Size: 32mm x 32mm x 13mm
4. With 4 Fixing 3mm Screw Holes
5. Input and Output Interfaces, Support for Cascading Multiple Modules
Wiring Instructions:
1. The left side of the module as an input port, an output port on the right.
2. When the control of a single module, simply input port connected to CPU
3. When cascading multiple modules, the first 1 input termination module of the CPU, the first output end 2 input modules, the first 2 output modules terminating the first three input modules, and so on.
از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-120.html
AftabRayaneh©2022