هوالرزاق


دسته بندی
برد توسعه ESP-32F
برد توسعه ESP-32F برد توسعه ESP-32F برد توسعه ESP-32F برد توسعه ESP-32F برد توسعه ESP-32F برد توسعه ESP-32F

برد توسعه ESP-32F

تولید کننده: Guoyun Technology
کد انبار : 5213-287-8297
مدل کالا : Goouuu-ESP
جستارش : A2-14-0204A
موجودی: تامین کالا فقط به صورت سفارشی پیش سفارش
قیمت:
270,000 تومان

تعداد: - +
   - یا -   

برد توسعه ESP-32F دارای وایفای و بلوتوث داخلی

ماژول ESP32 یک تراشه 2.4 گیگاهرتز Wi-Fi و بلوتوث است که به صورت combo chip و تکنولوژی TSMC چهل نانومتری طراحی شده است. این میکروکنترلر به منظور بهترین عملکرد پاور، عملکرد RF ، استحکام ، تطبیق پذیری و برای طیف گسترده ای از فرم های پاور طراحی و بهینه سازی شده است. میکروکنترلر ESP32 از CMOS برای رادیو و باند کاملاً یکپارچه استفاده می کند و کالیبراسیون پیشرفته آن به مدارات این اجازه را می دهند تا بطور دینامیکی خود را تنظیم کنند تا نواقص مدار را در شرایط خارجی حذف یا تنظیم کند. تمام embedded memory ، حافظه خارجی در باس داده یا دستورالعمل این CPU ها قرار دارند. با برخی موارد استثنائی جزئی، address mapping دو پردازنده متقارن است، به این معنی که آنها از آدرس های مشابه برای دسترسی به همان حافظه استفاده می کنند.

چیپ CP2102 یک کنترل کننده Bridge کاملاً یکپارچه USB-UART است که یک راه حل ساده برای بروزرسانی طرح های RS232 در USB با استفاده از حداقل اجزای سازنده و فضای PCB ارائه می دهد. CP2102 مبدل شامل یک کنترلر با عملکرد کامل USB 2.0 ، فرستنده USB ، اسیلاتور ، EEPROM یا EPROM و باس داده سریال اسنکرون (UART) با سیگنال های کنترل کامل مودم در یک پکیج QFN-5 mm 5 است.

چیپ 32F اساساً دارای همان هسته WCOOM-32 گواهی FCC است اما در قالبی منعطف. برد توسعه ESP-32F کوچک دارای Wi-Fi و بلوتوث داخلی است و مصرف برق بسیار کمی دارد و تمام آنچه شما برای انجام پروژه ای IoT خود لازم دارید در اختیار شما قرار می دهد.


کاربرد ماژول وای فای ESP-32F:

  1. اینترنت اشیا
  2. سیستم های نهفته

مشخصات ماژول وای فای ESP-32F:

  1. مجهز به چیپ مبدل CP2102
  2. پشتیبانی از حالت دانلود اتوماتیک بدون نیاز به تغییر حالت
  3. پشتیبانی از ویندوز (محیط های شبیه سازی Cygwin و msys32) و لینوکس
  4. پشتیبانی از ESP32-Arduino
  5. چیپ اصلی: ESP-32F
  6. پشتیبانی از WiFi + Bluetooth
  7. درایور نمایشگر: ST7735
  8. پورت اتصال: Micro USB
  9. فاصله سوراخ های مونتاژ: 56.8mm x 48.4mm
  10. ابعاد: 69.2mm x 60.3mm
  11. پشتیبانی از خواندن و نوشتن کارت TF
  12.  نمایشگر های قابل اتصال : TFT1.4 , Oled.96
  13. دارای بلندگوی 1 واتی

امکانات برد وای فای ESP-32F:

  1. کلید تاچ
  2. مبدل CP2102
  3. RGB LED
  4. سوکت نمایشگر و سنسور
  5. وایفای
  6. بلوتوث داخلی

مستندات:
راه اندازی برد وای فای ESP-32F


Description:
ESP32 is a single chip 2.4 GHz Wi-Fi and Bluetooth combo chip designed with TSMC low-power 40 nm technology. It is designed and optimized for the best power performance, RF performance, robustness, versatility, features, and reliability, for a wide variety of applications, and different power profiles. ESP32 uses CMOS for single-chip fully-integrated radio and baseband and also integrates advanced calibration circuitries that allow the solution to dynamically adjust itself to remove external circuit imperfections or adjust to changes in external conditions. It is a dual-core system with two Harvard Architecture Xtensa LX6 CPUs. All embedded memory, external memory, and peripherals are located on the data bus and/or the instruction bus of these CPUs. With some minor exceptions, the address mapping of two CPUs is symmetric, meaning they use the same addresses to access the same memory. Multiple peripherals in the system can access embedded memory via DMA. The CP2102/9 is a highly-integrated USB-to-UART Bridge Controller providing a simple solution for updating RS232 designs to USB using a minimum of components and PCB space. The CP2102/9 includes a USB 2.0 full-speed function controller, USB transceiver, oscillator, EEPROM or EPROM, and asynchronous serial data bus (UART) with full modem control signals in a compact 5 x 5 mm QFN-28 package.
Goouuu-ESP-32F is an ESP32 development board with a self-developed ESP-32F module as its core. It supports WiFi/Bluetooth. The onboard 1.44-inch TFT can be equipped with a 096-inch OLED, 2-channel touch button, and supports TF card reading and writing. It has 1W speakers so you can play PCM music.
The 32F has basically the same FCC certified WROOM-32 core but in a stackable format.
It is small, features both WiFi and Bluetooth, and has an ultra-low power consumption. All that makes this kit a great tool for your IoT projects.



Application:
IoT application
imbedded systems



Features:
Onboard CP2102 stable USB to TTL chip to ensure normal communication of the serial port.
Supports automatic download, no need to manually switch the download and run mode.
Support for Windows systems (Cygwin and msys32 emulation environments) and development on Linux systems
Supports ESP32-Arduino
Main Chip: ESP-32F
Type: WiFi + Bluetooth
Display: 1.44 inch TFT (Optional)
Display Driver: ST7735
Port: Micro USB
Mounting Hole Distance: 56.8mm x 48.4mm
Size: 69.2mm x 60.3mm 

از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-5213.html
AftabRayaneh©2022