هوالرزاق


دسته بندی
ماژول بلوتوث صوتی استریو KRC-86B V4 دارای چیپ CSR8630
ماژول بلوتوث صوتی استریو KRC-86B V4 دارای چیپ CSR8630 ماژول بلوتوث صوتی استریو KRC-86B V4 دارای چیپ CSR8630 ماژول بلوتوث صوتی استریو KRC-86B V4 دارای چیپ CSR8630

ماژول بلوتوث صوتی استریو KRC-86B V4 دارای چیپ CSR8630

کد انبار : 1609-118-2968
مدل کالا : KRC-86B-V4
جستارش : A1-12-0403B
موجودی: 1
قیمت:
416,700 تومان

تعداد: - +
   - یا -   

ماژول KRC-86B V4 مناسب برای ساخت اسپیکر وایرلس

ماژول KRC-86B V4.0 یکی از بهترین و با کیفیت ترین ماژول های صوتی موجود در بازار بوده که دارای گیرنده بلوتوث و AUX می باشد. این ماژول بدون افت سیگنال و نویز در خروجی قابلیت اتصال همزمان به دو دستگاه را دارد و برای ساخت اسپیکر یا آمپلی فایرهای وایرلس مناسب می باشد.
با استفاده از این ماژول به راحتی می توانید هدفون یا اسپیکر وایرلس خود را طراحی کنید. همچنین برای اکثر پروژه هایی که نیاز به یک گیرنده صوتی بلوتوث هست بسیار پرکاربرد می باشد.ورودی AUX را نیز پشتیبانی می کند. این ماژول Bluetooth 4.0 از تراشه CSR8630 پشتیبانی می کند که پس از روشن شدن به طور اتوماتیک به آخرین دستگاهی که به آن متصل بوده وصل می شود و در غیر این صورت به حالت Pairing وارد شده و با نام KRC-86B با پسوورد 0000 شناخته میشود. تغذیه مورد نیاز این ماژول 3 تا 5 ولت DC می باشد و با بردهای آردوینو نیز سازگار است.
چیپ CSR8630، یک ماژول آی سی برای ارتباطات بلوتوثی سازگار با بلوتوث 4 و دارای فرکانس 2.4 گیگاهرتزی می باشد.

کاربرد ماژول بلوتوث صوتی استریو KRC-86B V4:

  1. سیستم های صوتی
  2. ریموت کنترل
  3. سالن کنفرانس

مشخصات ماژول بلوتوث صوتی استریو KRC-86B V4:

  1. پسورد:‌0000
  2. نوع بلوتوث: V4.0 + EDR
  3. مسافت ارتباطی:‌ حداکثر تا 20 متر
  4. ابعاد:‌ 30 * 30mm 
  5. ولتاژ‌تغذیه:‌ 3 تا 5 ولت
  6. ورودی و خروجی استریو
  7. نمایشگر بلوتوث
  8. 5 پورت کلید

مستندات:
دیتاشیت چیپ CSR8630


Description:
KRC-86B V4.0 is based on the CSR 8630 Bluetooth chip that is perfect for creating your own wireless speaker or headphones or for any other use where you need to add a Bluetooth audio receiver to your project. It also supports an AUX input with automatic source selection.
In KRC-86B Series, the power is automatically turned on. The process of automatic initialization is probably completed around 5s after the module is powered.
After initialization, it automatically connects back to the last connected device and then the LED starts blinking. If the device is not connected to the device, the module automatically enters the pairing mode.
The CSR8630 QFN single-chip Bluetooth audio ROM device targets mid-range Bluetooth A2DP audio sink stereo speakers. The Bluetooth module provides a complete 2.4GHz. Bluetooth system based on the BlueCore CSR8630 chipset which is a single-chip radio and baseband IC for Bluetooth systems. This module is fully compliant to Bluetooth v4.0 for an audio communications processor with embedded flash memory, a high-performance stereo codec, a power management subsystem and LED drivers.

Application:
audio systems
remote control 


Features:
Password: 0000
Bluetooth Version: V4.0 + EDR
Receive Distance: Up to 20 meters of about 10 m, unobstructed case
Small Size: 30 * 30mm
Power: 3V~5 V
A set of stereo AUX audio input
A set of stereo audio output
A Bluetooth indicator
A Bluetooth status control output
5 key ports

Pinout:
VCC: Positive power supply 3~5V
GND: Negative one
LED+: Connected diode anode
LED-: Connected diode cathode
AGND: connected to an audio signal Cathode
OUTR: Right Output
OUTL: Left Output
INR: AUX right input
INL: AUX left input
com: button common terminal
Play / Stop: Play / Pause
VOL + / NEXT: short press next song, long press volume up
VOL - / REV: short press last song, long press volume down
EN: Bluetooth connection is high level (3.3V), disconnect the Bluetooth low level
NC: Function Reserved
از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-1609.html
AftabRayaneh©2022