هوالرزاق


دسته بندی
شیلد موتور درایور L293D آردوینو
شیلد موتور درایور L293D آردوینو شیلد موتور درایور L293D آردوینو شیلد موتور درایور L293D آردوینو شیلد موتور درایور L293D آردوینو

شیلد موتور درایور L293D آردوینو

تولید کننده: Aftab
کد انبار : 67-68-1008
مدل کالا : L293D Shield
جستارش : A1-03-0605A
موجودی: در حال حاضر موجود نمی باشد. موجودی کالا
قیمت:
89,780 تومان

تعداد: - +
   - یا -   

شیلد موتور درایور L293D مناسب برد آردوینو

درایور موتور یک رابط بین میکروکنترلر و موتور می‌باشد. با این روش میتوان توسط جریان ناچیز میکروکنترلر، به یک موتور با جریان زیادتر و ولتاژ متفاوت فرمان داد. شیلد موتور درایور L293D از دو درایور موتور L293D و یک شیفت رجیستر 74HC595 تشکیل شده است. شیفت رجیستر برای کنترل جهت درایورهای موتور 3 پین از آردوینو را به 8 پین توسعه می دهد. خروجی L293D، enable مستقیما به خروجی ها PWM آردوینو متصل می شود. L293 یک درایور چهار کاناله یکپارچه برای پشتیبانی از ولتاژ و جریان بالا می باشد. با استفاده از این درایور می توانید از موتور های دی سی و منبع تغذیه با ولتاژ حداکثر 36 ولت در پروژه خود استفاده نمایید.درایور موتور L293 مناسب برای آردینو مگا و UNO R3 می‌باشد وبا ولتاژ 3.6 تا 4.5 ولت کار می‌کند. هر کانال می تواند تا حداکثر 600 میلی آمپر جریان دهی نماید ، همچنین چیپ L293D به H-Bridge نیز معروف می باشد. در مجموع H-Bridge مداری است که امکان بارگزاری ولتاژ را به یک خروجی مثل موتور فراهم می کند.


کاربرد شیلد L293D:

  1. برد آردوینو UNO
  2. برد آردوینو Mega
  3. راه اندازی سروو موتور 
  4. راه اندازی استپر موتور

مشخصات شیلد L293D:

  1. دو رابط جهت اتصال موتور سروو 5 ولتی برای ارتباط به یک تایمر اختصاصی با دقت بالا بدون jitter
  2. قابلیت درایو 4 موتور دی سی و یا دو استپر موتور و یا دو سروو
  3. پشتیبانی از حداکثر 4 موتور دو جهته دی سی با 8 بیت جهت انتخاب سرعت
  4. پشتیبانی از حداکثر دو استپر موتور (unipolar or bipolar) با coil تکی یا دوبل یا interleaved stepping
  5. چهار H-Bridges- هر بریج 0.6 آمپر ( 1.2 آمپر پیک جریان) با محافظ حرارتی فراهم می نماید و می تواند موتورهایی با ولتاژ 4.5 تا 36 ولت دی سی را پشتیانی کند.
  6. مقاومت های Pull down موتورها را در زمان power-up غیر فعال می نمایند
  7. دکمه ریست
  8. دو ترمینال جهت اتصال منبع تغذیه
  9. سازگار با بردهای Mega, UNO

مستندات:
راه اندازی ماژول درایور موتور L293D
دیتاشیت آی سی L293D


Description:
L293D shield is a driver board based on L293 IC, which can drive 4 DC motors and 2 stepper or Servo motors at the same time. Each channel of this module has the maximum current of 1.2A and doesn’t work if the voltage is more than 25v or less than 4.5v. So be careful with choosing the proper motor according to its nominal voltage and current.
It can drive 4 DC motors or 2 stepping motors while also driving 2 servos, supporting the latest Arduino UNO, Arduino Mega 2560.
You can match this way: drive four DC motors and two servos, drive two DC motors and one stepper motor and two servos, drive two stepper motors and two servos.
Arduino is a good entry for electronic production. With the motor expansion board, it can be a good robot development platform. Here is a full-featured motor expansion board that can drive a variety of simple to slightly complex projects.
This is a commonly used DC motor drive module, using 293D chip small current DC motor drive chip. The pins are made Arduino compatible, which also facilitates enthusiasts to quickly develop based on Arduino.

Application:
UNO Arduino
Mega Arduino
servo motor
stepper motor

Features:
Two 5V servo motor (steering gear) ports are connected to Arduino's high-resolution high-precision timer-no jitter!
Up to 4 bidirectional DC motors and 4 PWM speeds (approximately 0.5% resolution)
Up to 2 stepper motors with forward/reverse control, single/dual step control, interleaved or microstep and rotation angle control.
4-way H-bridge: each bridge of L293D chip provides .0.6A (1.2A peak) current and has thermal shutdown protection, 4.5V to 36V.
The pull-down resistor guarantees that the motor remains stopped when powered on.
Large terminal terminals make wiring easier (10-22AWG) and power supply.
With Arduino reset button.
2 large terminal external power supply terminals ensure the separation of logic and motor drive power.
Compatible with Mega, Diecimila, & Duemilanove.
Provide a full set of spare parts for DIY enthusiasts who want to do it by themselves.
از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-67.html
AftabRayaneh©2022