هوالرزاق


دسته بندی
پولی 20 دندانه GT2 شفت 8 میلیمتری بسته 2 عددی
پولی 20 دندانه GT2 شفت 8 میلیمتری بسته 2 عددی پولی 20 دندانه GT2 شفت 8 میلیمتری بسته 2 عددی پولی 20 دندانه GT2 شفت 8 میلیمتری بسته 2 عددی پولی 20 دندانه GT2 شفت 8 میلیمتری بسته 2 عددی

پولی 20 دندانه GT2 شفت 8 میلیمتری بسته 2 عددی

کد انبار : 775-167-1844
مدل کالا : GT2-20
جستارش : A1-11-0508D
موجودی: در حال حاضر موجود نمی باشد. موجودی کالا
قیمت:
33,480 تومان

تعداد: - +
   - یا -   

پولی 20 دندانه GT2 شفت 8 میلیمتری مناسب پرینتر سه بعدی

پولی 20 دندانه GT2 یکی از قطعاتی مورد استفاده در سیستمهای حرکت خطی است که دارای دندانه های نیم دایره ای شکل می باشد. این ویژگی باعث می شود تا دندانه های تسمه تایم بطور یکنواخت و دقیق بر روی دندانه های پولی جای بگیرد و باعث شود تا در هنگام تعویض جهت حرکت پولی، تسمه تایم جای لقی روی دندانه ها نداشته باشد. این نوع پولی دارای بیست دندانه و مخصوص شفت های سایز 8 میلیمتر است. از این نوع پولی ها جهت به حرکت در سیستم حرکتی بطور همزمان استفاده می شود. هر چه تعداد دندانه های پولی ها بیشتر باشد دقت چاپ بالاتر خواهد بود.

جنس پولی ها از آلومینیوم آلیاژی است که برای انتقال قدرت از یک محور به محور دیگر مناسب است و امکان بزرگ کردن سوراخ مرکز نیز وجود دارد.


کاربرد پولی دندانه دار GT2-20:

  1. دستگاه س ان سی
  2. پرینتر سه بعدی
  3. دستگاه صنعتی و رباتیک

مشخصات پولی دندانه دار GT2-20:

  1. گام: 2 میلی متر
  2. تعداد دندانه: 20 عدد
  3. طول: 16 میلی متر
  4. قطر داخلی: 8 میلی متر
  5. ساخته شده از آلومینیوم
  6. حالت ثابت شده: 2تا M4
  7. عرض دندانه: 7.4 میلی متر

Description:
GT2-20 Teeth Aluminum Timing Pulley [8mm Bore] package contains synchronous toothed pulley that are used in the linear movement belt mechanism of the 3D printer. Most of the 3D printer needs a linear motion, but motors offer rotational motion, so a mechanism is needed to convert the rotational motion to the linear motion. Most 3D printers use a mechanism consist of leadscrews and timing belts. In the printing process, the leadscrew moves the hot end to upward or haet bed to downward to create a linear movement along Z-axis. Belts translate the rotational motion of the motor to linear motion in X and Y-axis. A belt mechanism consists of a coach fixed to the belt, a toothed pulley (sprocket) connected to the step motor and a timing belt with teeth. The belt teeth fit into the notches of the toothed pulley, preventing it from slipping, and allowing it rotates with the motor, so keeping the belt taut is a very important factor in timing.

This toothed pulley is made of a strong, durable, and lightweight material (aluminum) with an 8mm inner hole diameter that can firmly mount on any 8mm shaft especially step motor shaft and also can be more fastened to the shaft with 2 screws. On the other hand, This pulley has a 2mm pitch, 7.4mm tooth width that is specialized for 6mm GT2 timing belt series, to achieve precision linear movement, but the XML timing belt slips because of the different tooth arrange.

Application:
CNC machine
3D Printer
industrial and tobotic system

Features:
Pitch: 2mm
Number of Teeth: 20 teeth
Height: 16mm
Inner Diameter: 8mm
Material: Aluminium
Fixed Mode: 2* M4
Teeth Width: 7.4mm
از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-775.html
AftabRayaneh©2022