هوالرزاق


دسته بندی
بسته 2 تایی پولی 16 دندانه GT2 مخصوص پرینتر سه بعدی شفت 5 میلیمتری
بسته 2 تایی پولی 16 دندانه GT2 مخصوص پرینتر سه بعدی شفت 5 میلیمتری بسته 2 تایی پولی 16 دندانه GT2 مخصوص پرینتر سه بعدی شفت 5 میلیمتری بسته 2 تایی پولی 16 دندانه GT2 مخصوص پرینتر سه بعدی شفت 5 میلیمتری بسته 2 تایی پولی 16 دندانه GT2 مخصوص پرینتر سه بعدی شفت 5 میلیمتری

بسته 2 تایی پولی 16 دندانه GT2 مخصوص پرینتر سه بعدی شفت 5 میلیمتری

کد انبار : 828-167-1921
مدل کالا : 16-GT2-5-P5
جستارش : A1-09-1101A
موجودی: در حال حاضر موجود نمی باشد. موجودی کالا
قیمت:
35,960 تومان

تعداد: - +
   - یا -   

بسته 2 تایی پولی 16 دندانه GT2 مخصوص پرینتر سه بعدی شفت 5 میلیمتری

برای انتقال حرکت چرخشی استپر موتور بخش های مختلف از پولی و تسمه تایمینگ استفاده می شود. استفاده از پولی و تسمه تامینگ باعث کاهش لغزش و حرکت گسسته ی استپر موتور می شود. پولی ها به منظور تغییر مسیر و افزایش نیروی اعمال شده به یک بار مورد استفاده قرار می گیرند که در نتیجه موجب صرفه جویی در مصرف انرژی می شوند.
بهترین انتخاب برای پرینتر های سه بعدی برای افزایش دقت استفاده از تسمه تایمینگ و پولی است.
دقت پولی تاثیر بسزایی در دقت حرکتی سیستم حرکت خطی دارد. هر چه تعداد دندانه های پولی ها بیشتر باشد دقت چاپ بالاتر خواهد بود.
پولی های مدل GT2 معمولاً از آلومینیوم تولید می شوند و متناسب با قطر شفت مورد استفاده 5 میلیمتر ساخته می شود.

Description:
3D Printer GT2 16 Teeth Aluminum Timing Pulley [5mm Bore] package contains 10 pieces of synchronous toothed pulley that are used in the linear movement belt mechanism of the 3D printer. Most of the 3D printer needs a linear motion, but motors offer rotational motion, so a mechanism is needed to convert the rotational motion to the linear motion. Most 3D printers use a mechanism consist of leadscrews and timing belts. In the printing process, the leadscrew moves the hot end to upward or haet bed to downward to create a linear movement along Z-axis. Belts translate the rotational motion of the motor to linear motion in the X and Y-axis. A belt mechanism consists of a coach fixed to the belt, a toothed pulley (sprocket) connected to the step motor, and a timing belt with teeth. The belt teeth fit into the notches of the toothed pulley, preventing it from slipping, and allowing it rotates with the motor, so keeping the belt taut is a very important factor in timing.
This tooth pulley is made of a strong, durable, and lightweight material (aluminum) with a 5mm inner hole diameter that can mount on any 5mm shaft especially step motor shaft and also can be more fastened to the shaft with 2 M4 screws. On the other hand, This pulley has a 2mm pitch, 7mm tooth width that is specialized for 6mm GT2 timing belt series with 16 teeth, to achieve precision linear movement.

Features:
Pitch: 2mm
Number of Teeth: 16 teeth
Height: 16mm
Inner Diameter: 5mm
Material: Aluminium
Fixed Mode: 2* M4
Teeth Width: 7mm

از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-828.html
AftabRayaneh©2022