هوالرزاق


دسته بندی
ماژول رله 5 ولت 16 کاناله
ماژول رله 5 ولت 16 کاناله ماژول رله 5 ولت 16 کاناله ماژول رله 5 ولت 16 کاناله

ماژول رله 5 ولت 16 کاناله

کد انبار : 3376-73-5379
مدل کالا : RELAY-16CH
موجودی: در حال حاضر موجود نمی باشد. موجودی کالا
قیمت:
399,940 تومان

تعداد: - +
   - یا -   

برد رله 16 تایی 5 ولت 10 آمپر

به طور کلی رله یک قطعه مکانیکی است که از یک سیم پیچ و یک صفحه فلزی تشکیل شده است. با اعمال ولتاژ و جریان پایین به قسمت سیم پیچ رله، سیم پیچ یا هسته به آهن¬ربا تبدیل می شود و صفحه فلزی را به خود جذب می کند در این حالت رله می تواند با ولتاژ و جریان پایین، ولتاژ و جریان بسیار بیشتری را کنترل کند.

ماژول رله 16 کاناله 5 ولت دارای 16 ورودی ایزوله و مجزا است که این ویژگی باعث شده این محصول بسیار پرکاربرد باشد. از طریق این ماژول رله می‌توان به طور مستقیم به میکروکنترلر‌هایی از قبیل برد آردوینو، AVR، ARM، PLC و غیره متصل شده و به سادگی آن‌ها را کنترل کرد. از آنجایی که جریان خروجی آی سی و میکرو کنترلرها بسیار محدود و ضعیف است، می توانید برای کنترل سایر لوازم برقی و الکترونیکی از این ماژول استفاده کنید.

LED های قرار گرفته بر روی ماژول زمانی که رله متصل است روشن می شوند.

ولتاژ کاری این ماژول 5 ولت است که مناسب استفاده در بردهای آردوینو و سایر میکروکنترلرها می باشد. در کنار رله یک LED نیز در نظر گرفته شده که وضعیت فعال یا غیرفعال بودن رله را نشان می دهد. هر رله حداکثر 250 ولت 10 آمپر در ولتاژ AC و در ولتاژ DC توانایی کنترل حداکثر 30 ولت 10آمپر را دارد. این ماژول بصورت Active Low است به این معنی که برای فعال کردن رله باید پین میکرو 0 و برای غیر فعال کردن باید 1 شود.



کاربرد ماژول رله 5 ولت 16ch:

  1. کنترل سایر لوازم برقی و الکترونیکی
  2. سیستم های امنیتی

مشخصات ماژول رله 5 ولت 16ch:

  1. تعداد کانال: 16
  2. ولتاژ تریگر: 5Vdc
  3. حداکثر ولتاژ بار: 220Vac, 30Vdc
  4. حداکثر جریان بار: 10A
  5. نشانگر: LED
  6. نوع تحریک: Active Low
  7. سایز: 180mm x 90mm x 20mm

Description:
In general, a relay is a mechanical piece that consists of a coil and a metal plate. By applying low voltage and current to the coil part of the relay, the coil or core turns into a magnet and attracts the metal plate. In this case, the relay can provide much higher voltage and current with low voltage and current.
The 5V 16 Channel Relay Module has 16 isolated and separate inputs, which makes this product very widely used. Through this relay module, you can directly connect to microcontrollers such as Arduino board, AVR, ARM, PLC, etc. and control them easily. Since the output current of ICs and microcontrollers is very limited and weak, you can use this module to control other electrical and electronic appliances.
The LEDs on the module light up when the relay is connected.
The working voltage of this module is 5 volts, which is suitable for use in Arduino boards and other microcontrollers. Next to the relay, there is also an LED that shows the active or inactive state of the relay. Each relay has the ability to control a maximum of 250 volts 10 amps in AC voltage and a maximum of 30 volts 10 amps in DC voltage. This module is Active Low, which means that the micro pin must be 0 to activate the relay and 1 to deactivate it.

Application:
Control of other electrical and electronic appliances
security systems

Features:
Number of channels: 16
Trigger voltage: 5Vdc
Maximum load voltage: 220Vac, 30Vdc
Maximum load current: 10A
Indicator: LED
Trigger type: Active Low
Size: 180mm x 90mm x 20mm

از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-3376.html
AftabRayaneh©2022