هوالرزاق


دسته بندی
کیت مینی لیزر حکاکی DIY-Laser
کیت مینی لیزر حکاکی DIY-Laser

کیت مینی لیزر حکاکی DIY-Laser

کد انبار : 2557-164-4254
مدل کالا : mini laser
جستارش : B2-03-0102A
موجودی: تامین کالا فقط به صورت سفارشی پیش سفارش
قیمت:
1,878,400 تومان

تعداد: - +
   - یا -   

کیت دستگاه مینی لیزر حکاکی DIY-Laser

حکاکی لیزری یکی از کاربرد های لیزر است که با کمک گرفتن از دستگاه و ماژول لیزر می توان برای حکاکی اشیا استفاده کرد. از کیت دستگاه مینی لیزر حکاکی DIY-Laser برای حکاکی یا علامت گذاری قطعات و مواد مختلف با مقاس های متفاوت می توان استفاده کرد.. از مزایای استفاده از دستگاه حک لیزری می توان به کیفیت، سرعت، دقت، دوام حک، راحتی استفاده از دستگاه و هزینه پایین تولید اشاره کرد.
دستگاه لیزر حکاکی قابلیت استفاده جهت متریال هایی نظیر کاغذ، مقوا، چوب، لاستیک، پارچه، چرم، جیر، سنگ، پلکسی، کاشی، شیشه، آلومینیوم ، آینه، مولتی استایل،  طلا، نقره، برنج، مس، استیل، آهن را دارد. اما باید در نظر گرفت که لیزرهایی با توان پایین را نمی توان برای حکاکی بر روی مواد با ضخامت و سختی زیاد استفاده کرد.
دیود لیزر این کیت مینی لیزر، دارای توان 250 میلی وات است و در مواردی همچون حک بر روی چرم، مقوا، کاغذ می توان استفاده کرد.
ولتاژ کاری مورد نیاز راه اندازی این کیت مینی لیزر 8 الی 15 ولت و جریان مورد نیاز آن، یک آمپر می باشد.
از جمله ویژگی این کیت مینی لیزر، متن باز بودن (Open Source) این دستگاه می باشد.

کاربرد دستگاه حکاکی لیزری:

  1. تزیئنات
  2. حکاکی چوب
  3. صنعت

مشخصات کیت مینی لیزر حکاکی:

  1. ابعاد دستگاه: 14.4x 16.8 x 20 سانتیمتر
  2. ابعاد کاری: حدود 4x 4 سانتیمتر
  3. ولتاژکاری: 8 الی 15 ولت یک آمپر
  4. دقت: 200 میکرون
  5. قدرت لیزر : 250 میلی وات
  6. سازگار با : Windows / تمامی نرم افزار های متن باز

مستندات:
معرفی mini Laser


Description:
Laser engraving is the practice of using lasers to engrave an object. Laser marking, on the other hand, is a broader category of methods to leave marks on an object, which also includes color change due to chemical/molecular alteration, charring, foaming, melting, ablation, and more. The technique does not involve the use of inks, nor does it involve tool bits which contact the engraving surface and wear out, giving it an advantage over alternative engraving or marking technologies where inks or bit heads have to be replaced regularly. In some cases, a laser engraver might prove to be the most advantageous manufacturing technology for your specific application.
There are three main genres of engraving machines. The most common is the X–Y table where, usually, the workpiece (surface) is stationary and the laser optics move around in two dimensions, directing the laser beam to draw vectors. Sometimes the laser is stationary and the workpiece moves. Sometimes the workpiece moves in one axis and the laser in the other. A second genre is for cylindrical workpieces (or flat workpieces mounted around a cylinder) where the laser effectively traverses a fine helix while on-off laser pulsing produces the desired raster image. In the third genre, both the laser and workpiece are stationary and galvo mirrors move the laser beam over the workpiece surface. Laser engravers using this technology can work in either raster or vector mode.


Application:
Engraving
labs
industries


Features:
Dimensions of the device: 14.4x 16.8 x 20 cm
Working dimensions: about 4x 4 cm
Voltage: 8 to 15 volts per amp
Accuracy: 200 microns
Laser power: 250 mW
Compatible with: Windows / all open source software
از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-2557.html
AftabRayaneh©2022