هوالرزاق


دسته بندی
ماژول رگولاتور DC به DC کاهنده 3 آمپر دارای نمایشگر و قابلیت تنظیم ولتاژ خروجی
ماژول رگولاتور DC به DC کاهنده 3 آمپر دارای نمایشگر و قابلیت تنظیم ولتاژ خروجی ماژول رگولاتور DC به DC کاهنده 3 آمپر دارای نمایشگر و قابلیت تنظیم ولتاژ خروجی ماژول رگولاتور DC به DC کاهنده 3 آمپر دارای نمایشگر و قابلیت تنظیم ولتاژ خروجی ماژول رگولاتور DC به DC کاهنده 3 آمپر دارای نمایشگر و قابلیت تنظیم ولتاژ خروجی ماژول رگولاتور DC به DC کاهنده 3 آمپر دارای نمایشگر و قابلیت تنظیم ولتاژ خروجی

ماژول رگولاتور DC به DC کاهنده 3 آمپر دارای نمایشگر و قابلیت تنظیم ولتاژ خروجی

کد انبار : 205-135-1161
مدل کالا : LM2596S
جستارش : A1-03-0504A
موجودی: 21
قیمت:
76,100 تومان

تعداد: - +
   - یا -   

ماژول رگولاتور DC به DC کاهنده 3 آمپر دارای نمایشگر و قابلیت تنظیم ولتاژ خروجی

ماژول های رگولاتور به دو صورت افزاینده و کاهنده می باشد که در رگولاتور های کاهنده ی ولتاژ با تنظیم کاربر خروجی ولتاژ به صورت رگوله و کمتر از ولتاژ ورودی است. خروجی رگولاتور ها میتوان به وسیله ی چرخاندن پتانسومتر روی ماژول تغییر داد.
به منظور نمایش مقادیر ولتاژ تنظیم شده بر روی ماژول از یک نمایشگر سه عددی سون سگمنت استفاده شده است. همچنین در این ماژول از چند نشان دهنده وضعیت LED برای آگاهی از میزان ورودی و خروجی ولتاژ استفاده شده است.
این ماژول رگولاتور 3 آمپر دارای جریان خروجی حداکثری 3 آمپر و جریان پایدار 2 آمپر می باشد. همچنین دارای قابلیت حفاظت در برابر اتصال کوتاه و افزیش دمای بالا می باشد.
با فشار دادن دکمه سمت راست نمایشگر می توان بین اندازه گیری ورودی یا خروجی سوییچ کرد. در حالت نمایشگر نشان می دهد که کدام ولتاژ را اندازه گیری می کند.
با فشار دادن کلید سمت چپ نیز می توان ولت متر را خاموش کرد.


کاربرد ماژول رگولاتور DC به DC کاهنده :

  1. شارژرهای خورشیدی باتری
  2. درایو LED های وات بالا
  3. منبع تغذیه جریان مداوم
  4. برق اتومبیل
  5. مدارات راه انداز
  6. مدارات با سطح ولتاژ غیر استاندارد

مشخصات ماژول رگولاتور کاهنده DC به DC :

  1. مدل: LM2596S
  2. جریان خروجی: حداکثر 3 آمپر
  3. ولتاژ ورودی: 40 ~ 4 ولت (حتما باید بیش از 1.5 ولت باشد)
  4. محدوده ولتاژ قابل تنظیم خروجی: 37 ~ 1.25 ولت
  5. فرکانس داخلی نوسان: 150 کیلوهرتز

Description:
A buck converter (step-down converter) is a DC-to-DC power converter that steps down voltage (while stepping up current) from its input (supply) to its output (load).
The LM2596 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving a 3-A load with excellent line and load regulation.
A Buck converter steps down a DC voltage from the input to the output. The circuit operation depends on the conduction state of the MOSFET:
On-state: The current through the inductor increases and the diode blocks.
Off-state: Since the current through the inductor can not abruptly change, the diode must carry the current so it commutates and begins conducting. Energy is transferred from the inductor to the capacitor resulting in a decreasing inductor current.
A buck converter can be used to maximize the power transfer through the use of impedance matching. An application of this is in a maximum power point tracker commonly used in photovoltaic systems.

Application:
Automobile electricity
Driving circuits
Unusual Voltage levels circuits
etc.

Features:
1. With voltmeter display, using an advanced microprocessor, voltmeter error ± 0.05V, range 0 ~ 40V. (Note: To ensure the accuracy of the voltmeter, please ensure that the input voltage is above 4V )
2. Tap the right button to switch the measurement input or output voltage, and the indicator light shows which voltage is being measured, and save the settings, even if it is powered off and then on.
3. The voltmeter can be turned off, and it can be easily realized by tapping the left button when it is not needed.
4. With terminal block, no soldering iron can be used conveniently, and retain the wire bond point
5. The input voltage is 4.0 ~ 40V (the input voltage must be 1.5v higher than the output voltage)
6. Adjustable output voltage range 1.25V ~ 37V continuously adjustable ( input voltage must be 1.5V higher than the output voltage )
7. The maximum output current can be as high as 3A, the normal stable working current is 2A
8. Using 150KHz internal oscillation frequency, the second generation of the electrical switching voltage regulator, power consumption and high efficiency.
9. With overheating protection and short circuit protection function.
از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-205.html
AftabRayaneh©2022