هوالرزاق


دسته بندی
ماژول دیمر AC به AC کاهنده 2 کیلو وات SCR
ماژول دیمر AC به AC کاهنده 2 کیلو وات SCR ماژول دیمر AC به AC کاهنده 2 کیلو وات SCR ماژول دیمر AC به AC کاهنده 2 کیلو وات SCR ماژول دیمر AC به AC کاهنده 2 کیلو وات SCR ماژول دیمر AC به AC کاهنده 2 کیلو وات SCR

ماژول دیمر AC به AC کاهنده 2 کیلو وات SCR

کد انبار : 1070-136-2253
مدل کالا : 2KW-SCR
جستارش : B2-05-0501A
موجودی: 244
قیمت:
59,780 تومان

تعداد: - +
   - یا -   

ماژول دیمر AC به AC کاهنده 2 کیلو وات SCR

دیمر (به انگلیسی: Dimmer) برای تنظیم میزان ولتاژ یا روشنایی استفاده می‌شود و به نوعی مقاومت متغییر یا پتانسیومتر است و نصب آن به صورت سری در مدار سیم فاز می باشد.
با اتصال لامپ و یا هر وسیله خانگی دیگر به این ماژول، می توانید ولتاژ AC برق شهری را کم کرده و در نتیجه توان یا همان قدرت آن را تحت کنترل خود داشته باشید تا قادر به تنظیم روشنایی، سرعت، فشار، دما و ... باشید.

کاربردها ماژول دیمر :

  1. مناسب برای کنترل حرارت هیتر
  2. کنترل دور موتورهای یونیورسال
  3. کنترل روشنایی لامپ های رشته ای
  4. مناسب برای کوره الکتریکی
  5. مناسب برای آبگرم کن الکتریکی
  6. کنترل میزان روشنایی لامپ
  7. کنترل دور موتور AC
  8. قابل اتصال به انواع مدارات الکتریکی و لوازم خانگی

مشخصات ماژول دیمر AC به AC کاهنده 2 کیلو وات SCR :

  1. ولتاژ تغذیه ورودی: 250 ~ 110 ولت AC
  2. حداکثر جریان خروجی: 25 آمپر
  3. حداکثر توان خروجی: 2000 وات
  4. اندازه هیتسینک: 30 × 35 × 4 میلی متر  

مستندات:
معرفی ماژول دیمر AC به AC کاهنده


Description:
Dimmers are devices connected to a light fixture and used to lower the brightness of the light. By changing the voltage waveform applied to the lamp, it is possible to lower the intensity of the light output.
Although variable-voltage devices are used for various purposes, the term dimmer is generally reserved for those intended to control the light output from resistive incandescent, halogen, and (more recently) compact fluorescent lights (CFLs) and light-emitting diodes (LEDs). More specialized equipment is needed to dim fluorescent, mercury vapor, solid-state, and other arc lighting.
Most of the appliances are powered from the AC supply such as Lights, TVs, and Fans, etc. We can turn ON/OFF them digitally if needed, using Arduino and Relays by building a Home automation setup. But what if we need to control the power of those devices for example to dim the AC Lamp or to Control the speed of the Fan.
In that case, we have to use a phase control technique and static switches like TRIAC to control the phase of AC supply voltage.
TRIAC is a three-terminal AC switch that can be triggered by a low energy signal at its gate terminal. In SCRs, it conducts in only one direction, but in the case of TRIAC, the power can be controlled in both directions.
When we put a single diode to an AC signal, we get a half-wave rectifier.
With just one diode, the positive part of the AC waveform remains & the negative part is chopped.
In order to control power, all we have to do is to control the time between the zero-cross and when we fire the pulse at the TRIAC gate. So we will use a potentiometer to change the delay timing. The Arduino code will read the value of a potentiometer and map that value to a delay between 1 and 10 milliseconds.

application:
Suitable for heater temperature control
Universal engine speed control
Lighting control of incandescent lamps
Suitable for electric oven
Suitable for electric water heater
Lamp brightness control
AC motor speed control

Features:
Input Supply Voltage: 110V ~ 250V AC
The Maximum Output Current: 25A
The Maximum Output Power: 2000W
Heatsink Size: 48 x 35 x 30mm
از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-1070.html
AftabRayaneh©2022