هوالرزاق


دسته بندی
پاور سوئیچینگ صنعتی 12 ولت 10 آمپر
پاور سوئیچینگ صنعتی 12 ولت 10 آمپر پاور سوئیچینگ صنعتی 12 ولت 10 آمپر پاور سوئیچینگ صنعتی 12 ولت 10 آمپر پاور سوئیچینگ صنعتی 12 ولت 10 آمپر پاور سوئیچینگ صنعتی 12 ولت 10 آمپر

پاور سوئیچینگ صنعتی 12 ولت 10 آمپر

کد انبار : 606-135-1624
مدل کالا : POWER 12V10A
جستارش : A2-10-0103A
موجودی: در حال حاضر موجود نمی باشد. موجودی کالا
قیمت:
361,660 تومان

تعداد: - +
   - یا -   

ماژول سوئیچینگ خروجی 12v 10A

هر سیستم یا مدار الکترونیکی نیاز به یک منبع تغذیه دارد که بسته به کاربرد آن، ممکن است دارای برق ثابت یا متناوب باشد. اما فاکتورهای مهمی برای انتخاب منابع تغذیه باید در نظر گرفت. از جمله این فاکتورها راندمان بالا، خروجی مورد نظر، اتلاف توان کم و ابعاد مناسب می باشد. برخلاف منبع تغذیه خطی ، ترانزیستور Pass از منبع تغذیه سوئیچینگ به طور مداوم بین حالتهای کم اتلاف ، Full-on و full-off تغییر می کند و زمان بسیار کمی را در اتلاف هنگام انتقال می گذراند، که این ویژگی انرژی تلف شده را به حداقل می رساند.

این ماژول سوئیچینگ دارای ولتاژ ورودی متناوب و خروجی ثابت 12 ولت و جریان خروجی در محدوده 10 آمپر می باشد. این ماژول پاور سوئیچینگ دارای محافظت دمایی، محافظت اضافه جریان و محافظت اتصال کوتاه می باشد. 


کاربرد ماژول منبع تغذیه AC به DC:

  1. کامپیوترهای شخصی
  2. منبع تغذیه خطی
  3. تجهیزات اندازه گیری آنالیز سوئیچینگ
  4. مبدل های DC به DC
  5. ترانسفورماتورهای الکترونیکی

مشخصات ماژول منبع تغذیه AC به DC:

  1. ولتاژ ورودی: 85 تا 265 ولت AC فرکانس 50/60 هرتز
  2. ولتاژ خروجی: 12 ولت DC
  3. جریان خروجی: 10 آمپر
  4. شرایط کاری: 10 ℃ ~ 50 ℃; 20% ~ 90% RH

Description:

A switched-mode power supply is an electronic power supply that incorporates a switching regulator to convert electrical power efficiently. Like other power supplies, an SMPS transfers power from a DC or AC source (often mains power) to DC loads, such as a personal computer, while converting voltage and current characteristics. Unlike a linear power supply, the pass transistor of a switching-mode supply continually switches between low-dissipation, full-on and full-off states, and spends very little time in the high dissipation transitions, which minimizes wasted energy. A hypothetical ideal switched-mode power supply dissipates no power.

This power supply is an isolated industrial-grade module power supply that provides temperature protection, overcurrent protection, and short-circuit protection features. With high and low voltage isolation, AC85 ~ 265V wide voltage input, and AC and DC dual-use. It includes a regulated DC 12V output, ultra-small size, high reliability, and high performance. The power supply includes overcurrent, overload, and short circuit protection.

Application:
Personal computers
Mobile phone chargers
Linear power supplies
Switching analysis measurement equipment
Electronic transformers

Features:
Protection Short circuit / overload / over voltage
Input Voltage & Frequency Range : 85 ~ 264VAC/47 ~ 63Hz
Inrush Current : 20A @ 120VAC ( cold start )
Output adjustment range : ± 10% ( rated output voltage )
Overload : 105% to 200% ( rated load ) , since the resumption of
Overvoltage: 115% ~ 135% ( rated output voltage )
Short circuit protection : recovery
Output start time : ≤ 2S @ 120VAC ≤ 1.0S @ 230VAC
Output hold time : ≥ 10mS @ 120VAC, ≥ 20mS @ 230VAC
Dielectric strength : Input - Output : AC1500V, 1min
Input - Chassis : AC1500V, 1min
Output - Chassis : DC500V, 1min
Work environment : 10 ℃ ~ 50 ℃; 20% ~ 90% RH ( non-condensing )

از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-606.html
AftabRayaneh©2022