هوالرزاق


دسته بندی
پروگرامر CC
پروگرامر CC پروگرامر CC پروگرامر CC پروگرامر CC پروگرامر CC پروگرامر CC

پروگرامر CC

کد انبار : 722-116-1764
مدل کالا : CC Debugger
جستارش : A1-12-0208B
موجودی: 1
قیمت:
642,060 تومان

تعداد: - +
   - یا -   

پروگرامر CC

دیباگر سی سی پروگرامر کوچک و یک دیباگر برای چیپ های روی سیستم با فرکانس رادیویی توان پایین است که با نرم افزار IAR Embedded Workbench for 8051 برای دیباگ کردن استفاده می شود و به عموان پروگرمینگ فلش قابل استفاده است و از این دیباگر برای کنترل تجهیزات قطعات انتخاب شده از SmartRF Studioمی توان استفاده کرد.

CC Debugger اساساً برای برنامه نویسی فلش و دیباگ کردن دستگاه های SoC مبتنی بر CCxxxx 8051 از Texas Instruments استفاده می شود.


کاربرد پروگرمر سی سی:

  1. پروگرام و دیباگ SoC
  2. پیکر بندی سیستم های وایرلس PurePath 
  3. کنترل تجهیزات CC85xx 
  4. برنامه نویسی CC85xx 

مشخصات پروگرمر سی سی:

  1. حداقل ولتاژ: 1.2ولت
  2. حداکثر ولت: 3.6 ولت
  3. دمای عملیاتی: 0 تا 85 درجه سانتی گراد
  4. ولتاژ رگوله شده دیباگر: 3.3 ولت
  5. حداکثر جریان: 200 میلی آمپر
  6. سیستم های عملیاتی پشتیبان:
  7. Microsoft® Windows® 2000
  8. Windows XP SP2/SP3 (32 bit versions)
  9. Windows Vista® (32 & 64 bit)
  10. Windows 7 (32 & 64 bit)

مستندات:
راهنمای استفاده از دیباگر سی سی
راهنمای پروگرامر CC


Description:
The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips. It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging and SmartRF Flash Programmer for flash programming. The CC Debugger can also be used for controlling selected devices from SmartRF Studio.
The CC Debugger is primarily used for flash programming and debugging software running on CCxxxx 8051-based System-on-Chip (SoC) devices from Texas Instruments. The PC tools available for these purposes are the SmartRF™ Flash Programmer [9] from Texas Instruments and IAR Embedded Workbench® for 8051 from IAR Systems.
When connected to the debugger, the SoC devices can be controlled directly from SmartRF™ Studio. SmartRF Studio will also be able to control supported CCxxxx RF transceivers (CC2520, CC2500, CC110x, CC11xL, CC112x, CC120x) when they are connected to the debugger.
In addition, CC Debugger is used for configuring the CC85xx devices with PurePath Wireless
Configurator and controlling them with PurePath Wireless Commander.


Application:
IAR Embedded Workbench for 8051: In circuit debugging of system-on-chips
SmartRF Flash Programmer: Flash programming of system-on-chips
SmartRF Studio RF: testing of radio devices (transceivers and SoCs)
SmartRF Packet Sniffer: Packet sniffing with selected radio devices

PurePath Wireless Configurator: Programming of CC85xx devices
PurePath Wireless Commander: Advanced control of CC85xx devices


Features:
Minimum voltage: 1.2 Volt
Maximum voltage: 3.6 Volt
Operating temperature: 0 to 85C
Regulated voltage on CC Debugger: 3.3 Volt
Maximum current: 200 mA
Supported Operating Systems:
Microsoft® Windows® 2000
Windows XP SP2/SP3 (32 bit versions)
Windows Vista® (32 & 64 bit)
Windows 7 (32 & 64 bit)xh-m229-atx-power-supply-adapter-module-aftab.html

از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-722.html
AftabRayaneh©2022