هوالرزاق


دسته بندی
برد توسعه N76E003
برد توسعه N76E003 برد توسعه N76E003 برد توسعه N76E003 برد توسعه N76E003 برد توسعه N76E003

برد توسعه N76E003

کد انبار : 4188-201-6606
مدل کالا : N76E003-V3
جستارش : A1-02-0401E
موجودی: 5
قیمت:
106,020 تومان

تعداد: - +
   - یا -   

برد توسعه N76E003

Product Features
Tang N76E003 new high speed 1T 8051 microcontroller family, provide 18 is the Flash KB a ROM , and may be configured Data Flash high capacity 1 KB SRAM, support wide operating voltage of 2.4V to 5.5V and -40 ℃ to 105 ℃ operating temperature, and having prepared high noise immunity 7KV ESD / 4KV EFT.
N76E003 provide up to 18 I / O pins at a 20 pin package; comprising double serial peripheral, SPI, I2C, 6-channel PWM output; built than <2% error of high accuracy of 16 MHz RC oscillator and similar products High resolution 8-channel 12 the ADC ; and includes a self-wake-up, under voltage detection and other functions; providing TSSOP20 (4mm * 6.5mm) and QFN20 (3mm * 3mm) a small package, both high performance and design flexibility.

Contrast and STM8S003F3P6
STM8S003F3P6: A total of 20 feet, the GPIO up to 16, 16 to support external interrupts; two 16-bit timers [TIM1 / TIM2], up to 3 output PWM signals; 5 ADC channels, supports SPI / I2C / UART ; 8KBYTE FLASH, 1K RAM, 128 BYTE EEPROM; 16M also has a built-speed oscillator, WDG like.

Advantages:
1T / 8051: 1T value microcontroller, 8051 we are more familiar with the classic kernel;
18KB Flash ROM: better than 8KB Flash, and 18KB of flash memory space, all can be used as data storage applications;
1024B SRAM;
17 +1 input ports: better support up to 16 GPIO;
2 * UART, I2C, SPI: better SPI / I2C / UART (Multi the UART a);
8ch of 12bit ADC: 5 better channel 10bit ADC;
6ch of individual duty PWM: PWM output than 3;
10KHz LIRC for WDT reset / WKT ;
16MHz HIRC ±1% Room temp. ±2% full condition;
-40 ~ 105 ℃ temperature range is wider;
2.4V to 5.5V supply voltage range wider;
TSSOP20 / QFN20;
ESD & EFT: HBM / 8KV MM / 400V, Over 4KV, excellent ESD and EFT, noise immunity and ESD protection capability;

Characteristics of
the CPU:
8 1T 8051 Fully static CMOS microcontroller core.
Instruction Set-51 is fully compatible with the MCS.
4-level interrupt configuration.
Dual Data Pointer (DPTRs)
Working conditions:
wide operating voltage range of 2.4V . to 5.5V
wide operating frequency of up to 16MHz.
industrial Operating temperature -40 ℃ to + 105 ℃.
memory:
up to 18K bytes of program code area APROM user.
configurable 4K / 3K / 2K / 1K / 0K byte LDROM boot code region, the use of the user can be flexibly configured.
All 128 bytes is partitioned into regions FLASH a.
built-IAP programming.
code encryption function.
direct access to the RAM chip 256 bytes.
indirect access to the extra piece 768 bytes RAM (XRAM) read by the MOVX instruction.
clock source:
-. 1% accuracy level at ± 16 MHz high-speed internal oscillator, 5.0V power conditions. The full range of operating conditions accuracy of ± 2% level.
low-speed internal 10 kHz oscillator.
Support for external clock input.
Support for real time software system clock switching (On-the-fly) function
other support software to configure the clock frequency of up to 1 / 512.

Features:
Up to 17 general-purpose standard pins, in addition to an input pin can do. All the output pins may be configured by two kinds of software, output slope (slew rate)
standard and the external interrupt pin ??????? ???????
two 16-bit timer / counters 0 and 1, is compatible with the standard 8051
a set of 16-bit timer with 2 inputs 3 capture function, alternative input pin 9
a set of 16-bit auto-reload timer function 3, the serial port can be used to configure the UART baud rate
a set of 16-bit PWM counter interrupt
a watchdog group ( the WDT), by the internal clock as the clock source independent 10kHz
a set of self-timer wakeup function (the WKT), for autonomous wake-up low power mode
two full duplex serial port, and framing error detection with automatic address recognition feature . UART0 TXD and RXD pin of the pin position can be replaced by software
a set of SPI bus, when the system clock is 16MHz, the master mode and the slave mode to achieve maximum transfer rate of 8Mbps Jieke
a set of I2C bus master mode and the slave Jieke mode reaches the maximum transmission rate 400kbps
three pairs of six-channel pulse width modulator (PWM), 10-pin output may be selected, 16-bit resolution, with different operating modes and failure of the brake (fault brake) functions
up to 8 channels can be configured to interrupt function pin, all I / O ports support this feature, the configuration may be edge or level triggered by software
a set of the ADC 12, the maximum conversion rate of 500ksps, starting hardware and is easier to control the conversion result comparator motor functions of
the power management module:
two power modes: idle mode and a power-down mode
power supply monitoring:
the undervoltage detection (BOD) for detecting a low voltage power supply system, voltage selection stage 4, a response may be configured to interrupt or reset
power-on reset (POR)
a potent ability EFT ESD and
development tools:
Based on the new development environment Tang KEILTM debug (OCD emulation)
TANG-circuit programming (ICP programming) in
TANG system programming (ISP programming), via UART chip programming

Contrast and STM8S003F3P6
STM8S003F3P6: A total of 20 feet, the GPIO up to 16, 16 to support external interrupts; two 16-bit timers [TIM1 / TIM2], up to 3 output PWM signals; 5 ADC channels, supports SPI / I2C / UART ; 8KBYTE FLASH, 1K RAM, 128 BYTE EEPROM; 16M also has a built-speed oscillator, WDG like.

Advantages:
1T / 8051: 1T value microcontroller, 8051 we are more familiar with the classic kernel;
18KB Flash ROM: better than 8KB Flash, and 18KB of flash memory space, all can be used as data storage applications;
1024B SRAM;
17 +1 input ports: better support up to 16 GPIO;
2 * UART, I2C, SPI: better SPI / I2C / UART (Multi the UART a);
8ch of 12bit ADC: 5 better channel 10bit ADC;
6ch of individual duty PWM: PWM output than 3;
10KHz LIRC for WDT reset / WKT ;
16MHz HIRC ±1% Room temp. ±2% full condition;
-40 ~ 105 ℃ temperature range is wider;
2.4V to 5.5V supply voltage range wider;
TSSOP20 / QFN20;
ESD & EFT: HBM / 8KV MM / 400V, Over 4KV, excellent ESD and EFT, noise immunity and ESD protection capability;

از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-4188.html
AftabRayaneh©2022