هوالرزاق


دسته بندی
شیلد پروگرامر ISP آردوینو
شیلد پروگرامر ISP آردوینو شیلد پروگرامر ISP آردوینو شیلد پروگرامر ISP آردوینو

شیلد پروگرامر ISP آردوینو

کد انبار : 2247-68-3773
مدل کالا : DEV-11168
جستارش : A1-01-1206A
موجودی: در حال حاضر موجود نمی باشد. موجودی کالا
قیمت:
349,850 تومان

تعداد: - +
   - یا -   

شیلد پروگرامر ISP آردوینو مناسب برای پروگرام AVR و بوت لودر

شیلد ISP برای AVR ، این شیلد به آردوینو شما اجازه می‌دهد که به عنوان یک پروگرامر عمل کند و استفاده از آن بسیار آسان است. شما می توانید از این خاصیت فوق‌‌العاده شیلد ISP برای رایت بوت لودر (BOOTLOADER) بر روی تراشه های ATmega استفاده کنید و آنها را به میکروکنترلرهای سازگار با آرادویو تبدیل کنید. شما می توانید تراشه‌های Atmega خود را به میکروکنترلرهای سازگار با آردوینو (Arduino) یا بوت لودر‌های (Bootloader)  برد آردوینو خود را عوض کنید. قبلا برای انجام از این قبیل کار‌ها نیازمند به بردبورد (breadboard) و سیم‌پیچی‌های شلوغ بود اما حالا با استفاده از این شیلد ISP کار‌ها خیلی راحت‌تر شده است.


کاربرد شیلد پروگرامر ISP آردوینو:

  1. پروگرام AVR و بوت لودر

مشخصات پروگرامر میکروکنترلرهای AVR:

  1. ولتاژ کاری: 5 ولت
  2. جریان کاری: حداکثر 500 میلی آمپر
  3. ابعاد: 2.3 * 5.4 * 6.9 سانتی متر
  4. وزن: 28 گرم

مستندات:
اطلاعات تکمیلی پروگرامر میکروکنترلرهای AVR


Description:
The Arduino ISP sketch allows your Arduino to act as a programmer. You can use this awesome power to burn bootloaders onto ATMega chips, turning them into Arduino-compatible microcontrollers. In the past, this required a breadboard and a whole  mess of jumper wires but we’ve just made it a ton easier on you with AVR ISP Shield.
This shield, once assembled, gives your Arduino a 28-pin ZIF (Zero Insertion Force) socket so it can grab onto unsuspecting ICs. The socket is wired to work directly with the ArduinoISP code, but burning bootloaders isn’t the only thing you can do with it. We’ve also connected the serial I/Os so that if you’re a programming ninja you can do cool tricks like programming ICs using the bootloader on-the-go.

Features:
Operating voltage: 5V
Operating current: 500mA (max)
Product size: 6.9 * 5.4 * 2.3 cm
Product weight: 28g

Pros:
1. Plug this expansion board into the Arduino UNO motherboard
2. You can burn the Bootloader to the Atmega328p in-line chip.
3. You can also write the bootloader to other Arduino or AVR chips with ISP interface through the cable.
4. Do not need a professional writer, or other programming tools
5. Do not have to connect the wrong line
6. Don't worry about mismatching the fuse bit to lock the chip
از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-2247.html
AftabRayaneh©2022