نمایشگر تک رنگ OLED ابعاد 2.42 اینچ و درایور SSD1309

Description:
This is a 2.42 inch OLED display module of 128x64 resolution in which the emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current.
Working without backlight, the OLED display module could give out light by itself.
In low ambient light conditions such as a dark room, an OLED screen can achieve a higher contrast ratio than an LCD.
OLED display module also has a much faster response time than an LCD.
The display with small dimension is suitable for MP3, function cellphone, smart health device, etc.

Communicate way：
SPI or I2C can be choosed by R15 , R17 and R13.
the default is SPI , R17 soldered, R13 and R15 are not soldered
if need I2C, remove R17 ,and solder on R15 and R13 (solder 0 ohm resistor)

Application:
Telecommunication devices
Household appliances
Industrial control
Instruments and Devices
Digital wall vehicle
Mining

Features:
OLED Driver IC: SSD1309
Resolution: 128 x 64
size:2.42 inch
Visual Angle: >160°
Input Voltage: 3.3V ~ 5V DC
Support: Arduino/ 51series/MSP430 series/ STM32/2/ CSR chip
Consumption: 0.04/h

Pinout:
1. GND (power ground)
2. VCC (power positive)
3. SCL (clock line)
4. SDA (data line)
5. RES (reset line)
6. DC (data / command)
7. CS (Chip Select)