هوالرزاق


دسته بندی
سه نظام 0.3mm الی 4mm
سه نظام 0.3mm الی 4mm سه نظام 0.3mm الی 4mm سه نظام 0.3mm الی 4mm سه نظام 0.3mm الی 4mm سه نظام 0.3mm الی 4mm

سه نظام 0.3mm الی 4mm

کد انبار : 3143-241-5047
مدل کالا : 3.17-DC3S
جستارش : B2-04-0404A
موجودی: در حال حاضر موجود نمی باشد. موجودی کالا
قیمت:
153,670 تومان

تعداد: - +
   - یا -   

سه نظام 0.3mm الی 4mm

سه نظام قطعه است که بر روی دریل نصب و انواع مته و سری، روی آن ها بسته می شود تا سوراخکاری صورت گیرد. این قطعه می تواند به دو صورت آچار خور یا آچاری و یا اتوماتیک باشد. استفاده از سه نظام اتومات راحتر و عوض کردن مته در این سه نظام بسیار سریعتر و آسان تر از سه نظام آچاری صورت میپذیرد. اما دریل اتومات معمولا قیمت بالاتری نسبت به دریل با سه نظام آچاری دارد.
سه نظام در واقع، یک رابط بین دریل و مته می باشد.

مشخصات:
جنس: فولاد (پر کربن)
قطر خارجی: 21.5 میلی متر
نوع: 2 درجه ای، 49 دقیقه و 24.7 ثانیه
قابلیت کار با دریل 4 ~ 0.3 میلی متری
حداکثر میزان بازشدن سه نظام: 4.2 میلی متر
اندازه اتصال: J1O(قطر سوراخ داخلی 6 میلی متر می باشد)
بزرگترین انتهای قطر مدل جی 10: 6.35 میلی متر
کوچکترین انتهای قطر مدل جی 10: 5.8 میلی متر
قطر شافت دریل: 2.3 میلی متر

موارد داخل بسته:
یک عدد سه نظام دریل 4 ~ 0.3 میلی متری
یک عدد شافت دریل 3.17 میلی متری
یک عدد آچار سه نظام

Description:
A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In drills and mills, it holds the rotating tool whereas in lathes it holds the rotating workpiece. On a lathe, the chuck is mounted on the spindle which rotates within the headstock. For some purposes (such as drilling) an additional chuck may be mounted on the non-rotating tailstock.
There are several types of chuck found on hand drills and braces.
The most common examples of these are split frame chucks, 2 jaw chucks, 3 jaw chucks, and 4 jaw chucks.
Many chucks have jaws (sometimes called dogs) that are arranged in a radially symmetrical pattern like the points of a star. The jaws are tightened up to hold the tool or workpiece. Often the jaws will be tightened or loosened with the help of a chuck key, which is a wrench-like tool made for the purpose.

Features:
Material: High Carbon Steel
Outside Diameter: 21.5mm
Type: 2 Degrees 49 Minutes 24.7 Seconds
Working With 0.3mm-4mm Drilling
Maximum Clamping: 4.2mm
Connection Size: JT0 (Inside Diameter Hole Is 6 mm)
JT0 Type The Biggest End Of Diameter: 6.350mm
JT0 Type The Smallest End Of Diameter: 5.800mm
Drill fit shaft diameter 2.3mm
3.17mm Brass Tree Stem

Package Includes :
1x 0.3-4mm Drill Chuck
1x 3.17mm Drill Shaft
1x Drill Key

از این پس درج نظرات صرفا از طریق سامانه آفتاب یار امکان پذیر می باشد، برای وارد شدن به صفحه کالا بر روی لینک زیر کلیک کنید:
http://aftabyar.com/page/aftab-3143.html
AftabRayaneh©2022